Comparison between automatic and manual oiling

China's lubrication equipment management and lubrication technology lags behind western industrialized countries, and most of the industries still remain in the 20th century's traditional way, that is, manual lubrication is not subject to sophisticated management. After China's industrial enterprises are following the international access route, drawing on development trends, and joining the World Trade Organization, product quality and delivery time have received intense attention. Efficient lubrication management products are also being valued by many people of insight.

Lubrication equipment management, in general, is inseparable from the use of oil injection methods and oil injection equipment, and is generally divided into two types of oil injection methods, manual oil injection and automatic oil injection, which are very different from each other. Artificial oiling is just like taking care of children. It is always concerned about the fullness of lubrication. The use of automatic oil injection is equivalent to that of a robot. If a series of elements are set, it will be fully automated. This is secondary, and the main difference is that the automatic injection can always give the machinery and equipment a uniform level of lubrication.

Take bearing lubrication as an example. As we all know, the purpose of bearing lubrication is to reduce frictional resistance, reduce wear, and absorb vibration, cooling (cooling) rust prevention and sealing. The quality and amount of lubricant play a big role. The loading of grease generally does not exceed one-third of the bearing space. Excessive grease may affect heat dissipation. Conversely, too little oil or oil loss will cause the service life of the bearing to be shortened.

If artificial oil injection is used, it is highly responsible and the oil filling volume of the lubrication part is in the cycle of the next stage without any omissions throughout the year.

The automatic oil injection will be based on the above circumstances, so that it is always in the normal stage to complete the lubrication, we can use the same location, the same running bearings to be temperature tracking test, the annual temperature changes to be compared to verify the manual and automatic oil injection bearing Impact. For several lubrication points on the same equipment, the demand for fuel injection quantity is often inconsistent. With this difference in demand, manual fuel injection is easier to ignore.

What companies pursue is the reduction of material costs and the increase in industrial efficiency. The implementation of technology management, establish a sense of cost management, so as to reach a consensus with the enterprise.