In recent years, the future of magnetic separators has been very good and development has been rapid. Particularly strong support in policies and industry. But with the birth of a new type of magnetic separator, there will be some problems, so how do you see and solve this problem? The following is a brief explanation of common faults and solutions:
What are the common faults of the magnetic separator?
1. First look at the appearance, if there is any difference from the past;
2. Turn on the power and see if it can work normally. In the process of operation, the sound master is abnormal. If it is not normal, it may be that the cylinder is stuck by obstacles, and even the cylinder cannot rotate, and the bottom box vibrates. In this case, stop and repair immediately and troubleshoot it.
3. The magnetic separator motor overheats and its sound is abnormal.
(1) Bearings have poor lubrication or wear;
(2) The fan blade is detached or worn out; the magnetic separator (3) has poor contact with the switch circuit, or the single-phase circuit is broken;
(4) The voltage is too low.
4, reducer overheating magnetic separator possible causes:
(1) Insufficient oil or poor oil quality;
(2) Worn gears and worms, or poor meshing;
(3) Bearings have poor lubrication or wear;
We should start from the details, strictly control the quality, and make the products fine and detailed.
Henan Leili Mining Machinery Co., Ltd. uses high-quality materials and has been processed through fine technological processes. We strictly follow the quality standards and strictly monitor every aspect of production to ensure perfect product quality!