- Reinforced Edges Between Lugs: Decreasing the chance of slicing
- Jointless: Track is much stronger than the joint type -------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
4. State of art technology
Thanks for endless our clients believe us and place the order to us. So we have enough found to invest on R&D every year. With several years research, we applied the Continuous Rubber Track inside the rubber track.Â
Continuous rubber track means the steel inside the rubber in process is coherent which means there are no weld joint between the steel. Comparing with common rubber track, Continuous Rubber track has some Performance Advantages as follow:
1: Good tensile strength The framework of the continuous rubber track is wind-up by one, single steel wire which offers a uniform a uniform tensile strength for which increase the whole track's tensile stength.
2: Low elongation Cause of the continuous structure of the track, the steel wire internal hard to be elongated so that gives the track a very low elongation.
3: Good anti-slip ability for steel wire internal The steel wire under the continuous structure forced uniform during the process of manufacture which makes the steel wire internal has a good ability of anti-slip during the rubber track's working.
4: Stable dimension for pitch The continuous structure assures low elongtion for rubber track which makes the dimension of the pitch more stable.
5. Steel wire not easy to break The continuous structure can offer a uniform tensile strength for the steel wire internal which makes the steel wire not easy to break and appear on the surface of the rubber track.
Since years, POOYERT makes use of the continuous steel-cable technology in order to enlarge strength and resistance. POOYERT rubber tracks are 40% stronger and long lasting, and the costs for the customers are reduced.
*Less ground damage Rubber tracks cause less damage to roads than steel tracks, and less rutting on soft ground than steel tracks.
*Low Noise A benefit to equipment operating in congested areas, rubber tracks make less noise than steel tracks.
*High speed Rubber tracks permit machines to travel at a higher speed than steel tracks.
*Less vibration Rubber tracks insulate machine and operator from vibration, extending the service life of machine and decreasing operator's fatigue.
*Low ground pressure The ground pressure of rubber tracks equipped machinery can be fairly low, about 0.14-2.30kg/m2, a major reason for its use on wet and soft terrain.
*Superior traction The added traction of rubber tracked vehicles permits them to pull twice the load of wheeled vehicles of the same weight.
*Light machinery weight Rubber track's pulling performance being twice that of wheels, it permits the lighter vehicles equip with rubber track to do the same pulling work than that of wheeled vehicles. -------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
6. How to confirm the size of the rubber tracks? Normally, we quote to our clients according to the size of the rubber track. The size of the rubber track including width of the rubber track, pitch length of the rubber track, and the links. Size: Width x Pitch x Links   Unit: mm -------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
7. The notice of using rubber tracks
1.Adjust the tension of the rubber crawler so that the height, the variable range is 10-20mm when the machine is lifted. Readjust when the tension decreases. (Be careful because the rubber crawler may come off if the tension is too low).
2.Avoid projections from the frame around the rubber crawler, especially on its inner circumference. (Rubber crawlers are easily deformed; if it comes into contact with the frame, an accident such as the rubber being cut can occur).
3.Avoid sharp projections when travelling.
4.Avoid turning too fast on concrete roads with a high coefficient of friction because this can cause accidents such as cutting the rubber.
5.Be careful that no oil, ect adheres to the rubber track. If it does, wipe it off immediatedly.
6.When storing for long periods, keep indoors, away from direct sunshine and rain.
7.Replace as soon as possible when abrasion of the sprockets is observed. -------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
8.Parameters Please noted that, the parameter just show the part of our size range, if you cannot find your size, please kindly inform us by email or other ways, we will customize for you.
Mobile Shelving Unit is that can be moved on tracks'. The installation of running wheels at the bottom of the shelves has the greatest advantage of improving space utilization, as a group of shelves only requires one passage. Mobile Shelvinghave the following characteristics: suitable for warehouses with high cost per unit area, such as cold storage, explosion-proof warehouses, etc; No chain transmission, more energy saving, and more reliable structure; mobile Shelvingcan be either electric or manual, making them more flexible and convenient. Mobile Shelving Unitcan be divided into open mobile shelvingand closed mobile shelves. The transmission mechanism of open mobile shelves is located in the base of the shelves, and the operating panel is located at the end of the shelves, with a simple appearance and convenient operation. There are safety branching switches at the front and back of the shelves, which immediately stop the entire shelf when encountering obstacles. Closed mobile shelves, when there is no need to access goods, all shelves are closed and can be fully locked after being moved together. Rubber seals are installed at the interfaces of each shelf, also known as enclosed shelves. Mobile shelvinghave the following advantages: mobile shelvingmove along tracks, so usually a group of shelves only requires one channel. This greatly increases the usage area of the warehouse, and the ground usage rate can reach 80%. This is a storage capacity that other types of shelves cannot reach, which is much larger than regular fixed shelves, saving space; Suitable for the storage of small samples and large quantities of low-frequency items. Items with few types of goods, large quantities, and low frequency of use; Can directly access every item of goods, without being limited to first in, first out; The storage capacity per unit area can be increased to about twice that of pallet shelves.Most of the medium, low, and high level warehouses in this type of warehouse use forward moving battery forklifts, balanced weight battery forklifts, and three-way forklifts for storage and retrieval operations. The space utilization rate of the shelf system is high. Flexible and convenient access. Accompanying with computer management or control can basically meet the requirements of modern logistics systems.
Widely used in manufacturing, third-party logistics, and distribution centers. It is suitable for both multi variety and small batch items, as well as for small variety and large batch items. This type of rack is most commonly used in high-level warehouses and super high-level warehouses (most shelves in automated warehouses use this type of rack).
Mobile Shelving Unit,Nsf Storage Wire Shelving,Rolling Storage Shelves,Mobile Shelving System
