Jiangsu Province will close more than 700 small chemical plants this year
The
metal profile produced by roll forming machine look beautiful, elegant and
noble. They are widely used for garden, factory, hotel, exhibition center and
villa, etc.
Cold Roll Forming Machine Components:
Roll forming machine consists of Uncoiler,
Coil sheet guiding device, Main roll forming system, Post cutting device,
Hydraulic station, PLC control system and Support table.
Optional with Hydraulic Decoiler, Auto Stacker, Safe Cover, Pre-Cutting, Film Covering Device, and so on.
Cold Roll Forming Machine Working
Flow:
Decoiling→Feeding & Guiding→Flattening(If
needed)→Pre- Punching/Cutting(If needed)→Roll Forming→Post Step
pressing/Punching(If needed)→Post Cutting→Finished Products To Support Table
Parameter:
9.Motor:4+4kw
Cold Roll Forming Machine Cold Roll Forming Machine, Cold Forming Machine, Cold Rolling Machine Botou Xianfa Roll Forming Machine Factory , https://www.rollforming.nl
In the province last year, a total of 2,713 production companies were eliminated and eliminated, accounting for 95.4% of the province's three-year target (2,843). Among them, a total of 1,894 households were shut down and eliminated in the Taihu Lake Basin, accounting for 88.1% of the target (2,150 homes) of the Taihu Lake Basin that was set by the provincial government. It is reported that this year's special chemical rectification work will focus on chemical companies entering the park and entering and entering the park, upgrading and upgrading, and at the same time strengthen the assessment and acceptance of all closed enterprises to ensure that these enterprises are closed.
1.Suitable to process:Colored Steel plate, galvanized board
2.Width of the plate:1000/1200/1250mm
3.Roller stations:10-19rows
4.Rolling material: Forging Steel 45#
5.Rolling galvanization thickness:0.05 mm
6.Material of the cutting blade :Cr12
7.Hydraulic oil :40#
8.Dimensions: 9000mm*1700mm*1600mm
10.Thickness of the plate:0.3-0.6mm
11.Productivity:8-10m/min
12.Diameter of the roller:70mm
13.Weight:About 4.6 T
14.Voltage:380V 50Hz
15.Processing precision : within 1.00mm
16.Transportation:one complete machine need one 40feet container
to hold
17.Payment term:30%deposit,and balance before delivery
18.Standard components: Chain 1 pcs, Hydraulic oil pipes: 2 pcs,
electromagnetism valves 1 pcs. limit switch:2 pcs
19.This machine is composed of feeding table,forming machine, pressing
device,cutting device, hydraulic system,computer control system,discharge table.
Optional devices have
manual uncoiler,hydraulic uncoiler,auto stacker and so on.
