Breakthrough in nanoscale fiber research: new optical waveguide sensors can be developed
Recently, experts from University of Science and Technology of China cooperated with experts from University of Maryland Medical School and Southwest University of Science and Technology to propose a new optical mode, one-dimensional Bloch surface existing in multilayer dielectric film and nano-fiber composite structure Wave and using this mode to successfully solve the technical problem that the ultrafine polymer nano fiber can not transmit the optical signal on the conventional substrate. It is well known that the tremendous achievements of micrometer-scale optical fibers have resulted in the highly developed Internet industry and the rapid "miniaturization" of the world. Therefore, the basic theory of micro-fiber won the 2009 Nobel Prize in Physics. Today, nanoscale optical fiber has become a hot research topic at the international frontier. Due to its good mechanical properties, especially its flexibility and flexibility, polymer nanofibers can be chemically modified to change the characteristics of their materials. This is one of the first choices for constructing ultra-compact photonic devices and miniaturizing integrated photonic circuits. However, its material flexibility, large aspect ratio, must be placed on the substrate, such as glass or silicon commonly used in order to truly practical, the development of new nano-optical waveguide sensor devices, and when the nano-fiber radius is small, such as less than 125nm When placed on the glass of nano-fiber will not be able to transmit optical signals. In order to solve this problem, the research team used the structural parameters to design multi-layer dielectric thin film to support the polymer nanofiber. With the photonic bandgap of multi-layer thin film, the optical signal leakage in the nanofiber was prevented. Experimental results show that ultrathin nanofibers can transmit optical signals completely in this multilayer dielectric film. According to reports, the research work has been supported by funding from the Ministry of Science and Technology, the National Natural Science Foundation of China, the Collaborative Innovation Center for Energy and Chemistry, and the Outstanding Youth Fund of Anhui Province. Related sample production process has been the University of Science and Technology of China Micro and nano research and manufacturing center of equipment and technical support.
PET Transparent color film
Brilliant color red,blue,green,yellow etc.
Thickness 12-350 mic can be customized .
It can be used for decorative glass, Xray base film , tapes etc.
Item
Test method
Unit
Test value
thickness
DADAO
μm
25-125
Thickness variation
ASTM E252
%
±3
Tensile strength
MD
ASTM D882
Mpa
200
TD
200
Elongation at break
MD
ASTM D882
%
120
TD
120
Friction coefficient
ASTM D1894
---
0.60
Heat shrinkage
MD
ASTM D1204
%
1.2
TD
0.5
Yeild stress
MD
ASTM D882
Mpa
110
Light transmission
ASTM D1003
%
10
Haze
ASTM D2457
%
1.0
Wetting tension
ASTM D2578
Dyne
52
Uv Coating Pet Film,Coated Polyester Film,Transparent Pet Color Film,Transparent Color Film Shijiazhuang dadao Packaging materials Co , https://www.ddplasticfilm.com