Zoyer Save Power Energy Saving Direct Driver Sewing Motor (DSV-01-EX988)
[ Basic Information ] : Ti3C2 Powder,Custom Ti3C2,Ti3C2 Single Layer Of Powder,Ti3C2 Organic Solution Jilin 11 Technology Co.,Ltd , https://www.11techmxene.com
Save energy in 50%! Â Efficiency up 40%!environment protection
 Energy-Saving Motor/Servo Motor/Electronic Adjustable-Speed Motor (DSV-1)
Can be used to many kinds of industrial sewing machinery such as garment, bag, box sewing. Low vibration and noise, low temperature rise, longer working life, smaller & lighter, more important, Low energy consumption (saving electricity by 60 to 80% compared with clutch motors)
Direct driver, easy fit, beautiful, no noise, environment protection.
Manu
The Fourth, Instructions of the control panel:
1. Each key purpose:
(1) "P" key
This key has two uses : The first use is to direct press "P" key to switch up or down needle position, if up pinhole lamp lights means up needle position, if down pinhole lamp lights means down needle position, if two lamps off means no needle position.
The second use is: Function Enter button, below point 2 are described below.
   "S" key
This button also has two uses : The first use is to simply press "S" key to off or on lamp on the head.
The second use is to function parameters ( confirm ) key, point 2 are described below .
"+" "-" key
 These two keys are used to adjust speed.
(2) To enter the parameter method of operation:
     Example: How to change the motor from clockwise to Counterclockwise
     The first step: Open the power;
     Step two: Press the "P" key, no leave, and use the other hand press the "+ " key , the screen will display the P-00
     The third step: press "+" key, the screen will display P-01, and then press the "+" key again, the screen will display P-02, (P-02) is a motor clockwise or Counterclockwise parameters (common parameter list has).
     Step Four: Now press "P" key (enter into parameter) screen will display "1"
     Fifth step:  press " - " key, change "1 "to "0"
( "1" clockwise " 0 " for the counter-clockwise , common parameters list has ) .
     Step Six: Press the "S" key to determine the parameters, save and exit the parameter.
3. Restore factory settings:
     Restore factory settings : Press the "P" key, no leave, and use the other hand press the "+ " key , the screen will display the P-00, then press "S" key 3 seconds, it will Restore factory settings.
1. Chemical formula: Ti3C2
2. Component elements: Ti,C
4. Chemical status: micro-nano size particles
5. Appearance and properties: black brown particles with micro/nano size
[Packaging specifications] : Fixed packaging 2/5/10/20g, or packaging according to customer requirements;
[Intended use] : Used for chemical etching preparation of MXenes, physical chemistry experimental research needs;
[Storage Conditions and Expiry Date]
This product should be stored at room temperature in a dry place away from light, avoid contact with acid, alkali and other liquids, long-term storage will occur slow oxidation.
[Inspection method]
This product can be confirmed by X-ray powder diffractometer crystal results; Confirmation of element composition by energy dispersive X-ray detector; Homomorphologic characterization was used to characterize the particle morphology. And the particle size distribution was evaluated by laser particle size analyzer.
[Safety Protection]
1. Health hazards
Hazard type: non-hazardous chemicals Chemical type: ceramic powder;
Invasion route: inhalation, ingestion;
Health hazards: the dust irritates the eyes, and oral administration irritates the gastrointestinal tract.
2. First aid measures
Skin contact: Take off the contaminated clothing and rinse the skin thoroughly with flowing water.
Eye contact: Lift eyelid and rinse with plenty of running water or normal saline for at least 15 minutes;
Inhalation: quickly leave the site to a place with fresh air;
Ingestion: drink enough warm boiled water to induce vomiting and seek medical treatment;
3. Ignition and explosion characteristics and fire protection
Flammability: non-flammable;
Registrant/Manufacturer Name: Jilin Yiyi Technology Co., LTD
Residence/Production address: Beihu Science Park, New District, Changchun City, Jilin Province
Contact information: +86-18043212860
After-sales service unit Name: Jilin Yiyi Technology Co., LTD