Yx-125 Round Down Pipe Roll Forming Machine
Truck Mounted Water Well Drilling Rig
Truck-mounted drilling rig for water well sale to Kenya,South Africa,Uganda,Nigeria,Tanzania,muddy and remote location water well portable drilling rig for sale.
Yikyui offers a range of exploration and geological drilling equipment and service.
Yikyui rigs are either hydraulic or mechanical and are designed and manufactured according to a large selection of configurations and different solutions,Truck Mounted Water Well Drilling Rig
Reasonable overall layout uses the tractor-mounted or full ground chassis for transportation with good maneuverability.
Truck-Mounted Drilling Rig,Hydraulic Water Well Driller,Field Irrigation Well Drilling Rig,Farm Irrigation Well Drilling Machine Henan YK Prospecting Machinery Co., Ltd , https://www.yyundergrounddrillingrig.com
No
Specification of the material
1
 Suitable Material
Colored Steel plate, Galvanized steel
2
 Width of the raw material
425mm
3
Thickness
0.4-0.7mm
Down pipe forming machine mainly consists of decoiler, roll forming system, cutting equipment, protective
guard, hydraulic system, control system, and product supporter. Curving pipe forming machine is the complementary equipment for down pipe forming machine. It can make curve for down pipe to meet the requirement of practical engineering projects.
Features
1. High efficiency: Capable of producing down pipes with any length.
2. Good appearance: The color of down pipe can be in accordance with the house
3. Easy installation and long lifetime.
Details of each composition
A: Roll forming main machine
1: Coil width: Depend on profile
2: Working speed: 8m-10m/min (not contain cutting)
3: Roll station: 20stations
4: Material of roller: 45# forge steel, polished and coated with chrome
5: Material of main shaft: 45# forge steel diameter roller: 56mm
6: Main power: 3kw
7: Forming thickness: 0.5mm color steel
8: Transmission: By Chains
9: Size of machine: About 8500 x 1000 x 1200 (L x W x H)
10: Weight: About 4500Kgs
11: Color: Blue and yellow (also can change depend on customer request)
10: Cutting:
(1)Flat-sheet cutting: It is used when changing the coil of raw material; It can cut the coil rapidly and time-saving.
(2)Cutting after forming: Cut the sheet after roll forming to required length
(3)Cutting motion: The main machine automatically stops and the cutting will take place. After the cutting, the main machine will automatically start.
(4)Material of blade: CR12with heat treatment
(5)Length measuring: Automatic length measuring
(6)Tolerance of length: +/- 1.5mm
B. Uncoiler
Dimensions: 1700mm*1000mm*800mm
Width of feeding: 500mm
Capability: 3 Ton
Bound of expand &fight: 420mm-510mm
Mode of expand &fight: Inner expand &fight by manual
Way of feeding: Manual
C: Control panel Panasonic
(1)Voltage, Frequency, Phase: 380 V, 50 Hz, 3Phase (this is can depend on customer request)
(2)Automatic length measurement:
(3)Automatic quantity measurement
(4)Computer used to control length & quantity. Machine will automatically cut to length and stop when required quantity is achieved
(5)Length inaccuracy can be amended easily.
(6)Control panel: Button-type switch and touch screen
(7)Unit of length: Millimeter (switched on the control panel)
D: Hydraulic station
1: Hydraulic station power: 7.5kw
2: Hydraulic pressure: 12Mpa
E: Down pipe elbow machine:
1: Control system: Strong electrical current
2: Main motor power: 2.2kw
3: Max bend angle: 900
4: Function: Bend and fasten at the same time
5: Dimension of the machine: 1300 mm× 650 mm× 1500 mm
6: Speed of bend: 20-25m/ min
F: Manual out table:
(1)Jointed by 60mm*40mm tube
(2)Size: 1.0m long*0.8mwide*0.6-1mhigh
(3)One out table with two support rollers
In order to cover most of drilling sector needs, Yikyui offers varied solutions and products besides the complete rigs, including rotary drilling equipment and consumables, rotary and hammer drilling equipment, drill pipes, drill collars and casing, drilling accessories, as long as training and long-term technical assistance on site, for maintenance and exploitation of drilling rigs.
Very flexible in difficult roads and can be widely used in many fields such as resource exploration of hydrology wells, coalbed methane, the shallow layer of shale gas, terrestrial heat, etc, and can also be used for coal-mine gas exploitation salvage work.
The top-mounted driving head principal shaft has a great drift diameter, suitable for many kinds of construction work such as slurry drilling, air drilling, and air foam drilling, meeting the demands for well-drilling at different terrain strata.