Vec wheeled cavalry recon

March 05, 2019

The China Automobile Network reconnaissance vehicle column included China's Ministry of Industry and Information Technology Reconnaissance Vehicle Auto Announcement All 1 Categories 2 Manufacturers 1 Reconnaissance Vehicle Brand 3 Reconnaissance Vehicle Product Information, Latest Reconnaissance Vehicle Announcement, Environmental Protection Notice, Fuel Notice, Exemption Levy announcements, pictures, news, and most prompt reconnaissance vehicle pricing information.

Structural features The VEC cavalry reconnaissance vehicle is an all-welded aluminum body. The frontal arc-shaped structure can prevent 7.62mm×51 armor-piercing bullets. Other parts can prevent 7.62mm bullets, and some parts also use gap armor.
The driver is located in the left front of the vehicle and has a hatch that opens to the right. There are three front-view periscopes on the front of the cover, and the middle one can be replaced with an infrared or low-light periscope at night.
The VEC cavalry reconnaissance vehicle can use various types of turrets such as Oerlikon-Buehrle GBD-COA or GAD-BOA. It can be equipped with various machine guns from 7.62 to 12.7mm and various guns from 20 to 90mm. The turret is installed between the first two bridges and is located in the center of the car body. The VEC cavalry reconnaissance vehicle serving on the Spanish Army installed the OTO Melara T25 twin turret equipped with a KBA25mm gun and a 7.62mm parallel machine gun.
The power cabin is on the left side of the rear of the vehicle body. In and out air shutters are on the roof of the vehicle. A silencer is installed on the left side of the body, and the power compartment has a hatch.
The right side of the car has 1 occupant position behind the turret, with 1 right-handed single-leaf hatch and 1 periscope on the top. There will be one more occupant position, with a single-leaf hatch and three periscopes that will open later. There is a door on the right side of the body.
The three bridges of the VEC cavalry reconnaissance vehicle are all designed and manufactured by Picasso and are double deceleration type with self-locking differential. Each wheel has a self-adjustable independent suspension, allowing a maximum stroke of 275mm.
The standard equipment includes a toolbox, a semi-automatic fire extinguishing system for the winch and power cabin, and two 5kg portable fire extinguishers.
The optional equipment includes three defense devices, two water jet thrusters and wave boards, a winch, a communication system, a navigation system, a 14.00×20 tire, a run-flat tire, and an air conditioning system. [1]


The modified vehicle VEC cavalry reconnaissance vehicle can be used as a launch vehicle for anti-aircraft vehicles and anti-tank missiles. It had been equipped with a 90-m double turret from Hispano-Suza in France. [1]


Performance data crew: 5 people
Driving type: 6×6
Full weight of battle: 1375kg
Heavy load
Front axle: 5000kg
Center axis: 4450kg
Rear axle: 4300kg
Unit power: 16.4kW/t
Captain: 6.250m
Car width: 2.500m
Vehicle height (to the top of the body): 2.000
Floor height: 0.400m
Track:2.080m
Wheelbase: 1.650 + 1.650 (m)
Approach angle: 50°
Departure angle: 45°
Maximum speed
Highway: 106km/h
Water (wheel drive): 3km/h
Water (propulsion thruster): 9km/h
Fuel reserve: 400L
Maximum travel time of the road: 800km
Climbing degree: 60%
Roll slope: 30%
Height of vertical wall: 0.6m
The width is wider: 1.5m
Turning radius: 7.5m
engine
Production company: Pegaso
Model:9175/8
Type: Inline 6 cylinder turbocharged diesel
Power/rotation speed: 228kW/2200r/min
Transmission Model: ZF6HP500
Type: Automatic Transmission
Forward/Reverse: 6/1
Torque converter and hydraulic auxiliary brake
Production company: ZF company
Steering device type: First and third axis hydraulic power assistance
Tire size: 13×20 (or 14×20)
Suspension type: MaePhearson
Liquid air independent suspension
Brakes
Main brake: Air assisted dual-line hydraulic disc
Parking brake: Disc type, acting on drive shaft
Emergency brake: hydraulic air operation
Electrical System Village: 24V
Number of batteries / voltage / capacity: 2 / 12V / 140Ah [1]

What are Flow meters?
A Flow Meter is an instrument used to measure linear, nonlinear, mass or volumetric flow rate of a liquid or a gas.
Flow meters: Quality oval gear flowmeter, positive displacement flow meter, turbine flow meter, flow transducer or a flow sensor.
Low cost flow meters, high pressure flow meters, stainless steel flow meters, plastic flow meters, OEM flow meters, high viscosity flow meters, acid flow meters, alkali flow meters, hydraulic flow meters, oil flow meters, fuel flow meters, beer and water flow meters are all possible. With our chemically resistant, high accuracy digital flow meters with pulse outputs, we can handle almost anything. For hazardous areas some of these can be considered as simple apparatus.
Our process control and measuring instruments can monitor and/or display : total, batch size, flow rate, switch, consumption and 4-20mA or 10 volt analogue loops. The batching instruments can be used for dispensing, totaliser, accumulated totaliser, flow rate, dispense amount as well as full process monitoring.
The Oval gear, positive displacement and Turbine flow meters produced by Titan are designed and manufactured to ISO9001 and calibrated to an uncertainty of ±0.25%. With over thirty years of experience in the production of flowmeters our team can offer either an of the shelf meter or fully bespoke flow products designe for a particular application whether it is a low cost OEM flow solution or a specialist flowmeter in exotic materials.
Installation Cautions for Flowmeters
In liquid service, be sure that the flowmeter is installed such that it remains full of liquid, because gas/vapor in the flowmeter can alter its geometry and adversely affect accuracy.
In gas/vapor service, be sure that the flowmeter is installed such that the flow meter remains full of gas/vapor, because liquid in the flowmeter can alter its geometry and adversely affect accuracy.
Disturbances located upstream of the flowmeter, such as pipe elbows and control valves, can adversely affect measurement accuracy, because the flow meter may not be able to accurately measure disturbed flow streams. Be sure to locate control valves downstream of the flowmeter so their flow disturbances are not introduced directly into the flowmeter. Also, be sure to properly design the upstream and downstream piping with sufficient straight run to remove disturbances that can affect measurement accuracy.
Be especially careful when flow is two-phase, such as liquid/gas flow and liquid/solid flow, because these flows can adversely affect the accuracy of many flow meters. Be careful because some flowmeters can become plugged and stop working in liquid/solid flow streams.
Application Cautions for Flowmeters
Each type of flowmeter has its own specific applications and installation constraints. There is no "one size fits all" flowmeter. The way to select the right flowmeter is to use the application as your guide, not the technology. Many of these technologies will all work well on many applications. If you start with the application, you can select the technology you wish to use based on accuracy, cost, durability and reliability, rather than trying to make the technology you chose fit the application you have.

Flow Meter

Mechanical Flow Meter, Pneumatic Check Valve, Turbine Water Meter, Liquid Flow Meter

Shanghai Jiasong Machine Co., Ltd , http://www.fuel-dispenser-parts.com