Ss Socket Welding 45 90elbow (1.4306, X2CrNi1911)

July 13, 2023

Model NO.: Socket Welding 45 90Elbow
Model NO.: Socket Welding 45 90Elbow
  Product Type:
        
         Full coupling, Harf coupling, Reducing coupling, Reducer insert, Union, 90°elbow, 45°elbow,
        Tee, Cross, Cap, Cross, Square head plug, Hex head plug, Round head plug, Hex head bushing,
        Union, Reducing swage, Welding Boss, Mitre Boss, High Pressure Boss, Socket Reducing Insert.
 
Size:
       
        1/2" to 4"(DN15~DN100)
 
Range(Wall Thickness):

        3000LB to 9000LB
        XS, Sch80, Sch160, XXS.
 
Standard:

        ASME/ANSI B16.11, MSS SP-79, MSS SP-83, MSS SP-95, MSS SP-114, JIS B2316, JIS B2302 etc.
 
Material:

        Stainless steel, Duplex steel, Alloy steel, Carbon Steel, Low-temperature steel, 
        Nonferrous metal (Nickel Alloy, Aluminum Alloy , Titanium Alloy,...) etc.
 
+ SOCKET WELD FITTINGS

        A Socket Weld is a pipe attachment detail in which a pipe is inserted into a recessed area of a Valve, fitting or flange. In contrast to butt-weld fittings, Socket Weld fittings are mainly used for small pipe diameters (Small Bore Piping); generally for piping whose nominal diameter is NPS 2 or smaller.

        To join pipe to Valves and fittings or to other sections of pipe, fillet-type seal welds be used. Socket-welded Joints construction is a good choice wherever the benefits of high leakage integrity and great structural strength are important design considerations.
Fatigue resistance is lower than that in butt-welded construction due to the use of fillet welds and abrupt fitting geometry, but it is still better than that of most mechanical joining methods.
SW Fittings are family of high pressure fittings are used in various industrial processes.
 
Types of Threaded Fittings by Class and Size
Description
Class Designation
 
3000 6000 9000
Elbows 45 and 90 degrees,
Tees, Crosses, Couplings,
Half-Couplings,
End or Pipe Caps		 1/2 - 4 1/2 - 2 1/2 - 2
1/2 - 4 1/2 - 2 1/2 - 2
1/2 - 4 1/2 - 2 1/2 - 2
Pipe Size
by Wall Thickness		 SCH 80 / XS SCH 160 XXS
Plugs and Bushings are not identified. They may be used up through Class 6000 NPS

+THREADED FITTINGS

        Threaded joints probably represent the oldest method of joining piping systems. Like Socket Weld fittings, threaded fittings are mainly used for small pipe diameters (Small Bore Piping); generally for piping whose nominal diameter is NPS 2 or smaller.

Types of Threaded Fittings by Class and Size
Description

Class Designation
2000 3000 6000
Elbows 45 and 90 degrees
Tees, Crosses, Coupling
Half-Coupling, Cap		 1/2 - 4 1/2 - 2 1/2 - 2
1/2 - 4 1/2 - 2 1/2 - 2
1/2 - 4 1/2 - 2 1/2 - 2
Pipe Wall SCH 80 / XS SCH 160 XXS
Plugs and Bushings are not identified. They may be used up through Class 6000     Product Type:
        
         Full coupling, Harf coupling, Reducing coupling, Reducer insert, Union, 90°elbow, 45°elbow,
        Tee, Cross, Cap, Cross, Square head plug, Hex head plug, Round head plug, Hex head bushing,
        Union, Reducing swage, Welding Boss, Mitre Boss, High Pressure Boss, Socket Reducing Insert.
 
Size:
       
        1/2" to 4"(DN15~DN100)
 
Range(Wall Thickness):

        3000LB to 9000LB
        XS, Sch80, Sch160, XXS.
 
Standard:

        ASME/ANSI B16.11, MSS SP-79, MSS SP-83, MSS SP-95, MSS SP-114, JIS B2316, JIS B2302 etc.
 
Material:

        Stainless steel, Duplex steel, Alloy steel, Carbon Steel, Low-temperature steel, 
        Nonferrous metal (Nickel Alloy, Aluminum Alloy , Titanium Alloy,...) etc.
 
+ SOCKET WELD FITTINGS

        A Socket Weld is a pipe attachment detail in which a pipe is inserted into a recessed area of a Valve, fitting or flange. In contrast to butt-weld fittings, Socket Weld fittings are mainly used for small pipe diameters (Small Bore Piping); generally for piping whose nominal diameter is NPS 2 or smaller.

        To join pipe to Valves and fittings or to other sections of pipe, fillet-type seal welds be used. Socket-welded Joints construction is a good choice wherever the benefits of high leakage integrity and great structural strength are important design considerations.
Fatigue resistance is lower than that in butt-welded construction due to the use of fillet welds and abrupt fitting geometry, but it is still better than that of most mechanical joining methods.
SW Fittings are family of high pressure fittings are used in various industrial processes.
 
Types of Threaded Fittings by Class and Size
Description
Class Designation
 
3000 6000 9000
Elbows 45 and 90 degrees,
Tees, Crosses, Couplings,
Half-Couplings,
End or Pipe Caps		 1/2 - 4 1/2 - 2 1/2 - 2
1/2 - 4 1/2 - 2 1/2 - 2
1/2 - 4 1/2 - 2 1/2 - 2
Pipe Size
by Wall Thickness		 SCH 80 / XS SCH 160 XXS
Plugs and Bushings are not identified. They may be used up through Class 6000 NPS

+THREADED FITTINGS

        Threaded joints probably represent the oldest method of joining piping systems. Like Socket Weld fittings, threaded fittings are mainly used for small pipe diameters (Small Bore Piping); generally for piping whose nominal diameter is NPS 2 or smaller.

Types of Threaded Fittings by Class and Size
Description

Class Designation
2000 3000 6000
Elbows 45 and 90 degrees
Tees, Crosses, Coupling
Half-Coupling, Cap		 1/2 - 4 1/2 - 2 1/2 - 2
1/2 - 4 1/2 - 2 1/2 - 2
1/2 - 4 1/2 - 2 1/2 - 2
Pipe Wall SCH 80 / XS SCH 160 XXS
Plugs and Bushings are not identified. They may be used up through Class 6000  

Woven Bag Punching Machine

This unit uses dual extruders and dual tractors to compound multiple substrates by casting, and complete the bright compounding process of the front and back of the plastic woven bag in one production process. The unit has high degree of automation, advanced technology and convenient operation. The whole machine adopts PLC operating system, linkage control, automatic temperature control of each extruder, automatic suction, and the composite product has strong adhesion fastness, good effect, uniform thickness and good sealing performance.


The cement bag perforating needle rollers and woven bag perforating needle rollers developed by our company adopt imported alloy steel wire needles with high strength and good abrasion resistance. With advanced drilling technology, the processing precision reaches the same level in the world.


The base material of this series of needle rollers generally adopts hard aluminum alloy and copper alloy, which has the characteristics of good quality, low price, economical and practical.

Our company specializes in the supply of woven bag needle rollers, cement bag needle rollers, and woven bag needle rollers wholesale. The product quality and processing technology reliability and stability are at the domestic advanced level. We can produce various special specifications of needle rollers according to customer requirements. Needle ring products. Customers are welcome to consult.

non-woven needle roller,Automatic punching machine equipment, woven bag double-sided punching machine, cement bag punching needle roller, woven bag punching needle roller, Cement bag woven bag ultra-micro hole punching machine

Changzhou Puyisen Machinery Technology Co., Ltd. , https://www.pysmachine.com