Seaflo New 55psi Portable Mini Electric Diaphragm Pump

October 19, 2023

Model NO.: SFDP1-030-055-43
Start Up: Electric Pump
Type: Positive-Displacement Pump
Application: Clarified Water Pump, Sewage Pump, Oil Transfer Pump, Chemical Pump
Industry: RV/Marine/Yachts/Boat/Caravan/Water System,Ect
Media: Water Pump
Performance: Diaphragm Pump
Theory: Centrifugal Pump
Voltage: 12V
Flow Rate: 11.3lpm/3.0gpm
Duty Cycle: Intermittent
AMPS: 7.5A Max
Pressure: 55psi/3.8bar
Diaphragm: Santoprene
Valve: EPDM/Viton
Protection: Thermal/Ignition Protection
Ports: Quick Attatch
Wire Connection: 2-Pin/Leads
Trademark: SEAFLO
Transport Package: Strong Carton/Poly Foam.
Specification: CE, RoHS, ISO9001: 2008, TUV
Origin: Fujian, China
HS Code: 8413509090
Model NO.: SFDP1-030-055-43
Start Up: Electric Pump
Type: Positive-Displacement Pump
Application: Clarified Water Pump, Sewage Pump, Oil Transfer Pump, Chemical Pump
Industry: RV/Marine/Yachts/Boat/Caravan/Water System,Ect
Media: Water Pump
Performance: Diaphragm Pump
Theory: Centrifugal Pump
Voltage: 12V
Flow Rate: 11.3lpm/3.0gpm
Duty Cycle: Intermittent
AMPS: 7.5A Max
Pressure: 55psi/3.8bar
Diaphragm: Santoprene
Valve: EPDM/Viton
Protection: Thermal/Ignition Protection
Ports: Quick Attatch
Wire Connection: 2-Pin/Leads
Trademark: SEAFLO
Transport Package: Strong Carton/Poly Foam.
Specification: CE, RoHS, ISO9001: 2008, TUV
Origin: Fujian, China
HS Code: 8413509090

SEAFLO New 55PSI Portable Mini Electric Diaphragm Pump

11.3LPM/3.0GPM 55PSI
 
Description
Run dry without damage  (Run Dry Capability)   
Quick-connect plug-in ports for easy installation (Hose Kit Included) 
Self-priming 
Ignition & Thermally Protected 

Specifications
How a Diaphragm Pump Works:
1. The pump is driven by an AC or DC motor

2. In front of the motor is a valve assembly containing two to five valve pump chambers. Each valve chamber has a diaphragm behind it in the lower pump housing. As the motor shaft turns, an internal cam positioned behind the diaphragms causes the diaphragms to be pushed forward, then back in a continuous sequence creating a suction. As this suction builds, fluid is pulled through the inlet, through the various valve chamber check valves to the outlet 

3. The volume of flow is determined by several factors including: the number and size of the pump chambers, cam offset, operating pressure, fluid viscosity

Application:
1. Yacht / RV/Caravan pressurized water system 
2. Sprayer fixtures (Vehicle-mounted sprayers, electric sprayer)
3. Clean machine, Humidifier, Water purification, Medical apparatus  
4. Food beverage filling & liquid transfer
5. Any other pressurization system

Seaflo New 55psi Portable Mini Electric Diaphragm Pump
Seaflo New 55psi Portable Mini Electric Diaphragm Pump

 


Technical Data:

Motor Voltage 12/24V DC
Type 4 chamber diaphragm pump, self priming, capable of being run dry
Mode Demand or bypass
Certifications Option CE Approval
Liquid Temperature 140°F (60°C) Max.
Priming Capabilities 6 feet (1.8 m)
Max Pressure 55psi (3.8bar)
Max Flow rate 11.3lpm (3.0gpm)
Thermal Overload Protected Start working when temperature reach 90°C(+-10%)
Inlet/Outlet Ports 10/13mm pyramid hose barb, 13mm angle hose barb, 1/2 FNPT thread filter for your choice.
Duty Cycle Intermittent (under different pressure the continuous working time will also be different)
Motor options 2 pin connector
On/off switch
 
Model Switch GPM/LPM PSI/BAR Max Draw
(A)		 Valves Diaphragm Ports Voltage Wire
Connections
SFDP1-030-055-43 Demand 3.0/11.3 55/3.8 7.5 EPDM Santoprene 1/2"-14 MNPT 12V 2-Pin/Leads
SFDP2-030-055-43 Demand 3.0/11.3 55/3.8 4.0 EPDM Santoprene 1/2"-14 MNPT 24V 2-Pin/Leads

Seaflo New 55psi Portable Mini Electric Diaphragm Pump
FAQ
1. What is your MOQ?
100 pieces in general, but we also sale about 10--50 pieces for new costumers for their sample testing.
 
2. What about the delivery time?
It depends on your order quantity; it usually takes 15-25days upon receipt of your 30% deposit by T/T.
Sample can be delivered within 7days.
 
3. Can I buy different types in one container?
Yes, you can mix different types in one container.
 
4. Do you have oversea agents?
1. Of course. We have many agents overseas, such as Dacon Europe A/S in Denmark, A P Lifting Gear Company LTD in United Kingdom, SEAFLO MARINE & RV NORTH AMERICA, LLC in United States, Bin Alshaikh Abobaker for Treading in Yemen, Williams Industrial Products Pty Ltd/Marine Systems Australia and SEAFLO AUS pty in Australia, Azzi Sport Marine S.A.R.L in Lebanon, SARAY DENIZ MALZEMELERI YATCILIK SAN.TIC.LTD.STI in Turkey, RECAMBIOS MARINOS S.L in Spain, DINO CO.,LTD in South Korea.
2. Welcome oversea agents!
 
5.Do you accept OEM/ODM
Yes. We are also the OEM supplier of many famous companies, such as WALMAT.
 
6. What is your terms of payment.
T/T, 30% in advance, balance against B/L copy.
 
7. What is your warranty?
5 years, and within 24 hours reply will be provided to solve customers' problems.
 
8. What is your port of loading?
Fuzhou Port.

SEAFLO New 55PSI Portable Mini Electric Diaphragm Pump

11.3LPM/3.0GPM 55PSI
 
Description
Run dry without damage  (Run Dry Capability)   
Quick-connect plug-in ports for easy installation (Hose Kit Included) 
Self-priming 
Ignition & Thermally Protected 

Specifications
How a Diaphragm Pump Works:
1. The pump is driven by an AC or DC motor

2. In front of the motor is a valve assembly containing two to five valve pump chambers. Each valve chamber has a diaphragm behind it in the lower pump housing. As the motor shaft turns, an internal cam positioned behind the diaphragms causes the diaphragms to be pushed forward, then back in a continuous sequence creating a suction. As this suction builds, fluid is pulled through the inlet, through the various valve chamber check valves to the outlet 

3. The volume of flow is determined by several factors including: the number and size of the pump chambers, cam offset, operating pressure, fluid viscosity

Application:
1. Yacht / RV/Caravan pressurized water system 
2. Sprayer fixtures (Vehicle-mounted sprayers, electric sprayer)
3. Clean machine, Humidifier, Water purification, Medical apparatus  
4. Food beverage filling & liquid transfer
5. Any other pressurization system

Seaflo New 55psi Portable Mini Electric Diaphragm Pump
Seaflo New 55psi Portable Mini Electric Diaphragm Pump

 


Technical Data:

Motor Voltage 12/24V DC
Type 4 chamber diaphragm pump, self priming, capable of being run dry
Mode Demand or bypass
Certifications Option CE Approval
Liquid Temperature 140°F (60°C) Max.
Priming Capabilities 6 feet (1.8 m)
Max Pressure 55psi (3.8bar)
Max Flow rate 11.3lpm (3.0gpm)
Thermal Overload Protected Start working when temperature reach 90°C(+-10%)
Inlet/Outlet Ports 10/13mm pyramid hose barb, 13mm angle hose barb, 1/2 FNPT thread filter for your choice.
Duty Cycle Intermittent (under different pressure the continuous working time will also be different)
Motor options 2 pin connector
On/off switch
 
Model Switch GPM/LPM PSI/BAR Max Draw
(A)		 Valves Diaphragm Ports Voltage Wire
Connections
SFDP1-030-055-43 Demand 3.0/11.3 55/3.8 7.5 EPDM Santoprene 1/2"-14 MNPT 12V 2-Pin/Leads
SFDP2-030-055-43 Demand 3.0/11.3 55/3.8 4.0 EPDM Santoprene 1/2"-14 MNPT 24V 2-Pin/Leads

Seaflo New 55psi Portable Mini Electric Diaphragm Pump
FAQ
1. What is your MOQ?
100 pieces in general, but we also sale about 10--50 pieces for new costumers for their sample testing.
 
2. What about the delivery time?
It depends on your order quantity; it usually takes 15-25days upon receipt of your 30% deposit by T/T.
Sample can be delivered within 7days.
 
3. Can I buy different types in one container?
Yes, you can mix different types in one container.
 
4. Do you have oversea agents?
1. Of course. We have many agents overseas, such as Dacon Europe A/S in Denmark, A P Lifting Gear Company LTD in United Kingdom, SEAFLO MARINE & RV NORTH AMERICA, LLC in United States, Bin Alshaikh Abobaker for Treading in Yemen, Williams Industrial Products Pty Ltd/Marine Systems Australia and SEAFLO AUS pty in Australia, Azzi Sport Marine S.A.R.L in Lebanon, SARAY DENIZ MALZEMELERI YATCILIK SAN.TIC.LTD.STI in Turkey, RECAMBIOS MARINOS S.L in Spain, DINO CO.,LTD in South Korea.
2. Welcome oversea agents!
 
5.Do you accept OEM/ODM
Yes. We are also the OEM supplier of many famous companies, such as WALMAT.
 
6. What is your terms of payment.
T/T, 30% in advance, balance against B/L copy.
 
7. What is your warranty?
5 years, and within 24 hours reply will be provided to solve customers' problems.
 
8. What is your port of loading?
Fuzhou Port.

Filter End Caps

The filter end caps have a variety of end cap types such as Dust Collector Filter End Caps, dust filter element cover, activated carbon filter element cover, oil filter element end caps, air filter element end caps, water filter element end caps, etc.
At the same time, it can also be divided into square filter end caps, round filter end caps, Open Round Filter End Caps, special-shaped filter end caps, and other types;
According to the material, it can be divided into galvanized filter end caps, aluminum filter end caps, stainless steel filter end caps, and anti-fingerprint filter end caps. etc.
If you don't know this aspect, don't worry, you just need to tell us your use environment and its requirements, and our professional team can make a recommendation that is most suitable for you.

Metal Filter End Caps 1


FAQ

Q1: Are you a factory?
A1: Yes, we are a professional manufacturer of wire mesh products focusing on wire mesh for decades.

Q2: How can I get a quotation?
A2: You need to provide material, sheet size, wire diameter, hole distance, and quantity for inquiry. Special requirements can also be specified.

Q3: Is it ok if I want free samples?
A3: Yes, we can provide free samples in 20cm-50cm sizes along with our catalog. But the express fee will be on your account. If you place an order, we will refund the courier fee.

Q4: What's your payment term?
A4: Generally, our payment terms are T/T 30% advance payment, balance 70% against copy of B/L. We can also discuss other payment terms.

Q5: How about your delivery time?
A5: 1. We always prepare enough stock materials for your urgent needs, and the lead time for all stock materials is 7 days.
Depending on quantity and technology, exact lead times and production schedules for non-stock items will be communicated to you.

Filter End Caps,Dust Collector Filter End Caps,Filter End Caps For Dust Collector,Open Round Filter End Caps

Anping County Dongjie Wiremesh Products Co., Ltd. , https://www.dongjiewire.com