Local Mechanical Display and Pulse Output Mechanical Fuel Consumption Flow Meter for Boats

Flow Meter Fuel Consumption Flow Meter

A.[Features of Fuel consumption flow meter]

Professional flow meter for fuel consumption

This flow meter just for fuel consumption engine

High Accuracy 

This flow meter with 1.0% high accuracy by the rotate piston principle

Display and Output

The fuel consumption flow meter with local mechanical display and pulse output(optional)

Prevent Steal Oil

The fuel consumption flow meter can prevent stealing oil by driver and reduce the cost.

Normal Function

360° Cover , waterproof ,dustproof and connection with GPS.

B.[Parameter]

B:Filter

R:Pulse output

OEM:Pulse output but without Display

C.[Function]

• Ensure direct measurement accuracte, easy and safe.
• It has function same aire elimilator.
• Pulsation will disappear when fuel goes through the adjustor.
• The pressure in return line will be zero with the adjustor.
• The V4 series is suitable for engines less than 200KW;The V8 series is suitable for more than 200KW to 500KW.
• They are widely apply to various engines,such as the vechicles;boats;generators,etc.

D.[Installation]

Note:

• The operator must have some experience;
• The flow meter can not installa near by the exhaust pipe to avoid increase the error
• The flow meter shoud be installa the location where low shock
• The flow meter should be installa where is easy to read the data
• To ensure the pipeline without air to avoid increasing error
• Installa the flow meter where lowest of pipeline
• Suggest installing the return oil processor
• Replace filter regular

Plate Rolling

A plate rolling machine is a machine that will roll different kinds of metal sheet into a round or conical shape. It can be also called a [roll bending machine", [plate bending machine" or [rolling machine".
There are different kinds of technology to roll the metal plate:
Four-roller machines have a top roll, the pinching roll, and two side rolls.
The flat metal plate is placed in the machine on either side and "pre-bent" on the same side. The side rolls do the work of bending. The pinching roll holds the plate.
Three-roller machines (variable pitch aka variable geometry) have one pressing top roll and two pressing side rolls.
The three-roll variable pitch works by having all three rolls able to move and tilt. The top roll moves in the vertical plane and the side rolls move on the horizontal plane. When rolling, the top roll presses the metal plate between the two side rolls. The advantage of having the variable three roll is the ability to roll many thicknesses and diameters of cylinders.
For example; The side-rolls are what produce the mechanical advantage. With the side rolls all the way open, one has the maximum mechanical advantage. With the side rolls all the way in, you have the least mechanical advantage. So, a machine has the capability of rolling 2-inch-thick material with the maximum mechanical advantage, but a job is only 1/2 inch thick. Reduce the mechanical advantage and one has a machine that can roll from 1/2 to 2 inches thick.A plate rolling machine is a machine that will roll different kinds of metal sheet into a round or conical shape. It can be also called a [roll bending machine", [plate bending machine" or [rolling machine".
There are different kinds of technology to roll the metal plate:
.Four-roller machines have a top roll, the pinching roll, and two side rolls.
The flat metal plate is placed in the machine on either side and "pre-bent" on the same side. The side rolls do the work of bending. The pinching roll holds the plate.
.Three-roller machines (variable pitch aka variable geometry) have one pressing top roll and two pressing side rolls.
The three-roll variable pitch works by having all three rolls able to move and tilt. The top roll moves in the vertical plane and the side rolls move on the horizontal plane. When rolling, the top roll presses the metal plate between the two side rolls. The advantage of having the variable three roll is the ability to roll many thicknesses and diameters of cylinders.
For example; The side-rolls are what produce the mechanical advantage. With the side rolls all the way open, one has the maximum mechanical advantage. With the side rolls all the way in, you have the least mechanical advantage. So, a machine has the capability of rolling 2-inch-thick material with the maximum mechanical advantage, but a job is only 1/2 inch thick. Reduce the mechanical advantage and one has a machine that can roll from 1/2 to 2 inches thick.

Plate Rolling,Plate Rolling Machine,Plate Roller,Plate Bending Machine,Rolling Bending Machine

Jiangsu Hoston Machine Tools Co., Ltd. , https://www.haostonmachinetools.com