High Speed Double Head Automatic Terminal Stripping Machine
Imitation spreading bird Feather Bird Ornament garden living room bonsai decorative bird feather handicraft bird.The collected feathers of many birds are applied with scissors, tweezers, scalpels, magnifying glasses and other objects used for surgery to connect the shape and color of the feathers, so as to carve out the above carved handicrafts with the theme of birds, or birds flying in the air, or birds perching on the branches, so that the small feathers can also become a spectacular handicraft.Simulation bird, fat bird, feather bird, magnetic bird, fridge, foam bird prop, mold, landscape decoration, fake bird. Easter Supplies,Easter Butterfly Gift,Easter Birthday Party Supplies,Easter Bonnet Supplies Xintong Craft Gift Co.,LTD , https://www.jlxtcraft.com
Features:
1.adjust the blade by computer,no gasket
2. The back end can be semi-stripped
3. Operation screen KINCO7 inch full english version
4.Pneumatic parts is TAIWAN Airtac
5. Control: 32 full SCM control system
6. Servo: Delta servo
7. Guide rail with silver, decelerator PHT
8. Detection of Japanese keenshi. Omron
9. The rear end is suitable for horizontal, straight OTP mould
Product specifications:
1.Model: high speed automatic terminal press (double end pressing)
2.Machine function: the computer controls both ends of the pressure, blade, peeling, semi-stripping and detection
3.Production capacity: 0.7sec/bar at both ends of the length 40MM
4.Speed: 40MM an hour 4000 root (feed speed 3000secMAX)
5.Wire cut length: 40-9999mm
6.Cut off accuracy: the deviation is 0.5MM when the cutting length is less than 100MM, and the cutting length is greater than 100MM and the deviation is positive and negative 1.0MM
7.Stripping length: 1 side 0.1-9.0 (semi-stripping 3.0-9.0 MM) 2 side 1.0-9.0MM (half stripping length 3.0-9.0 MM)
8.Press ability: 19600N(2T) mute terminal machine 2 (using mould AS42.AS40.AAE30)
9.Control mode: 32-bit microcomputer system
10.Check  function: check whether there are any wires, check the wire too tight, detect abnormal pressure, check the abnormal
11.Power supply: single phase AC220 50/60hz
12.Compressed air: 0.4mpa - 0.5mpa (with air volume about 130NI/min- 180NI/min)
13.Temperature range: around 15-30 degrees
14.Machine size: 1000*700*1550MM (not including the protrusions)
15.Weight: 460KG
Â
