High Flow Double Suction Water Pump

High Flow Double Suction Water Pump



Introduction

The S series pumps are single stage, double suction; horizontal split case pumps designed for high volume water transfer in a wide range of applications. Centurion pumps are available in 43 sizes ranging from 80mm to 400mm discharge and capable of capacities up to 4000 cubic meters per hour and heads up to 160 meters. Centurion pumps offer ease of maintenance with simple assembly/disassembly (no requirement for special tools). All major wear components and replaceable parts are easily accessible and can be changed out with minimal effort and downtime, without removing the suction and discharge piping.



Features

Adopts horizontal, vertical axis medium open type double pump shell structure, lining for cemented carbide or rubber has good wear-resisting, corrosion resistance and high reliability.
High efficiency hard alloy, and low NPSH
To meet the different operation conditions, adopted the brief type structure bearing parts, selected high bearing capacity design, alloy bearing grease lubrication oil.
Through adjusting the clearance between protection board and impeller, ensuring the pump efficient operation
Using packing seal, impeller sealing, and container type mechanical seal to adapt to different operating mode requirement.
Pump and drive can choose straight league transmission, triangle, hydraulic transmission device coupled transmission, reducer drive.
The outflow direction can be installed by eight Angle rotation to adapt to different site installation condition.
Available to use multiple series, to satisfy the long-distance transmission requirements



Technical Data
 

Pump Outlet:	80-800mm
Capacity:	60-11,600m3/hr
Head:	7-200m
Temperature:	Max 105ºC
Max Working Pressure:	25 bar
Max solids content:	80mg/L

Application

*Fire Protection
*Water Transfer
*Municipal Water Supply
*Irrigation
*Industry
*Process Water
*Raw Water Supply
*Dewatering (Clean Water)
*Flood Mitigation

Model Meaning

E.g. 250 S - 39 A
250 - Pump's inlet diameter
S - single-stage double-suction centrifugal pump
39 - rated head
A - impeller cut for the first time

Pump Performance
 

Pump Model	Capacity  (m3/h)	Head(m)	Motor Power  (kw)	Speed  (rpm)	NPSH  (m)
150S-50	160	50	37	2950	3.9
150S-78	160	78	55	2950	3.7
200S-42	280	42	45	2950	6
200S-95	280	95	132	2950	5.3
250S-14	485	14	30	1450	3.8
250S-65	485	65	132	1450	3.1
300S-90	790	90	315	1450	4.2
350S-125	1260	125	710	1450	5.4
400S-90	1620	90	560	1450	6.2
500S-59	2020	59	450	970	4.5
600S-75	3170	75	900	970	6
800S-76	5500	76	1600	730	6
800S-76	4400	49	800	585	4.2

Construction Material

Cast Iron, Ductile Iron, Stainless Steel Available.



Pump Drive

Electric Motor / Diesel Engine






Shirley 

Tel: +86(312)6795175
Fax: +86(312)3085385
Mobile+86 13932278621 

Tips: 

Necessary information to be provided to select a pump/ make quotation:
1. Medium to be pumped ( water / partical size / PH / specific gravity / temperature )
2. Horizontal, Vertical or Submersible Pump ?
3. Head / Pressure
4. Flow Capacity
5. Drive type (Motor / Diesel)
6. You local power supply (voltage & frequency)


We specialized in centrifugal pumps including Slurry /Water/Chemical Pumps.
More pump models and spare parts are available.

High Flow Double Suction Water Pump



Introduction

The S series pumps are single stage, double suction; horizontal split case pumps designed for high volume water transfer in a wide range of applications. Centurion pumps are available in 43 sizes ranging from 80mm to 400mm discharge and capable of capacities up to 4000 cubic meters per hour and heads up to 160 meters. Centurion pumps offer ease of maintenance with simple assembly/disassembly (no requirement for special tools). All major wear components and replaceable parts are easily accessible and can be changed out with minimal effort and downtime, without removing the suction and discharge piping.



Features

Adopts horizontal, vertical axis medium open type double pump shell structure, lining for cemented carbide or rubber has good wear-resisting, corrosion resistance and high reliability.
High efficiency hard alloy, and low NPSH
To meet the different operation conditions, adopted the brief type structure bearing parts, selected high bearing capacity design, alloy bearing grease lubrication oil.
Through adjusting the clearance between protection board and impeller, ensuring the pump efficient operation
Using packing seal, impeller sealing, and container type mechanical seal to adapt to different operating mode requirement.
Pump and drive can choose straight league transmission, triangle, hydraulic transmission device coupled transmission, reducer drive.
The outflow direction can be installed by eight Angle rotation to adapt to different site installation condition.
Available to use multiple series, to satisfy the long-distance transmission requirements



Technical Data
 

Pump Outlet:	80-800mm
Capacity:	60-11,600m3/hr
Head:	7-200m
Temperature:	Max 105ºC
Max Working Pressure:	25 bar
Max solids content:	80mg/L

Application

*Fire Protection
*Water Transfer
*Municipal Water Supply
*Irrigation
*Industry
*Process Water
*Raw Water Supply
*Dewatering (Clean Water)
*Flood Mitigation

Model Meaning

E.g. 250 S - 39 A
250 - Pump's inlet diameter
S - single-stage double-suction centrifugal pump
39 - rated head
A - impeller cut for the first time

Pump Performance
 

Pump Model	Capacity  (m3/h)	Head(m)	Motor Power  (kw)	Speed  (rpm)	NPSH  (m)
150S-50	160	50	37	2950	3.9
150S-78	160	78	55	2950	3.7
200S-42	280	42	45	2950	6
200S-95	280	95	132	2950	5.3
250S-14	485	14	30	1450	3.8
250S-65	485	65	132	1450	3.1
300S-90	790	90	315	1450	4.2
350S-125	1260	125	710	1450	5.4
400S-90	1620	90	560	1450	6.2
500S-59	2020	59	450	970	4.5
600S-75	3170	75	900	970	6
800S-76	5500	76	1600	730	6
800S-76	4400	49	800	585	4.2

Construction Material

Cast Iron, Ductile Iron, Stainless Steel Available.



Pump Drive

Electric Motor / Diesel Engine






Shirley 

Tel: +86(312)6795175
Fax: +86(312)3085385
Mobile+86 13932278621 

Tips: 

Necessary information to be provided to select a pump/ make quotation:
1. Medium to be pumped ( water / partical size / PH / specific gravity / temperature )
2. Horizontal, Vertical or Submersible Pump ?
3. Head / Pressure
4. Flow Capacity
5. Drive type (Motor / Diesel)
6. You local power supply (voltage & frequency)


We specialized in centrifugal pumps including Slurry /Water/Chemical Pumps.
More pump models and spare parts are available.

Round Open Water Cooling Tower

The whole structure is solid and light;the body and water pond is manufactured with reinforced glass fibre (FRP glass fiber reinforced plastics),never being corrosive. The surface finish is added with ultraviolet inhibitor,which can resist sunshine attack and damage.

All steel and iron material is processed through galvanizing by dipping,Ocorrosion resisting and durable.

Special designed axial-flow type air blower applies belt reduction gear,reducing low noise and sufficient wind; tailor-made water-drop noise
reduction carpet to eliminate water sound.

Apply special design PVC water block curtain (water-stop) to prevents plashing) remarkably; pressure drop loss is slight and splashing loss i under 0.001%.

Apply cellular vacuum molding heat dissipation material, stagger arrangement surface has grooves and the heat exchange effect is especially good.

Round Open Water Cooling Tower,Water Cooling Tower,Round Cooling Tower,Cool Water Towers

Wuxi Ark Fluid Science Technology Co., Ltd. , https://www.arkfluid.com