Dump Truck Cylinder
Yrt Yotary Table Bearing,29352-E Table Bearing,Rotary Table Bearing Slewing Bearing Co.,Ltd. , http://www.slewingring-bearings.com
Tipper cylinder components: 5 parts, 1 cylinder and cylinder head 2, piston and piston rod 3, sealing device 4, buffer device 5, exhaust device Tipper works: Take a manual jack for its working principle, the jack is the simplest cylinder. Manually pressurized stalks (hydraulic manual pump) allow the hydraulic oil to enter the cylinder through a single valve. At this time, the hydraulic oil entering the cylinder cannot be reversed because of the single valve, forcing the cylinder rod upwards, and then continuing to make the hydraulic oil continue to work. Into the hydraulic cylinder, so it continues to rise, when you want to drop the hydraulic valve, hydraulic oil back to the tank. This is the simplest working principle, and others are improved on this basis. Tipper cylinder material: Tipper cylinder material is a general seamless steel tube made of silico-manganese. The limit pressure of the piston of the tipper cylinder is 16 MPa, and the stroke of the cylinder ranges from 3830 to 8000. Yili Company is a manufacturer specializing in the production of dump truck front cylinders. The dump truck cylinders produced have all the characteristics of the cylinders. Dump truck fuel tank performance and use: The fuel tank is mainly used for dump truck front straight lift mechanism, using advanced processing technology, selection of high quality steel, general type of imported seals, reasonable structure, reliable performance, easy installation and maintenance, lifting Tonnage, long life and other characteristics.