Diaphragm valve composition and working characteristics and performance introduction

January 15, 2023

Diaphragm valve with corrosion-resistant lining of the valve body and corrosion-resistant diaphragm instead of spool assembly, the use of diaphragm movement from the regulation. Diaphragm valve body material made of cast iron, cast steel, or cast stainless steel, and lined with a variety of corrosion-resistant or wear-resistant materials, diaphragm materials, rubber and PTFE. The lining of the diaphragm corrosion resistance, suitable for strong acid, alkali and other corrosive media regulation. Diaphragm valve structure is simple, fluid resistance, flow capacity than the same size of the other types of valves; no leakage, can be used for high viscosity and suspended particulate media regulation. The diaphragm isolates the media from the upper chamber of the stem, so no media will not leak. However, due to diaphragm and lining material limitations, pressure resistance, temperature resistance is poor, generally only applies to 1.6MPa nominal pressure and 150 ℃ below. The flow characteristics of the diaphragm valve are close to the quick-opening characteristic, which is approximately linear before 60% of the stroke and little change after 60% of the flow. Pneumatic diaphragm valve can still be attached to the feedback signal, limiter and locator and other devices to adapt to automatic control, program-controlled or regulate the flow needs. Pneumatic diaphragm valve feedback signal using non-contact sensing technology. The product uses a membrane-propeller cylinder, instead of the piston cylinder, ruled out the piston ring is easily damaged, resulting in leakage can not promote the valve opening and closing of the drawbacks. When the air supply fails, the handwheel can still be operated to open and close the valve. Search Keyword: More Valve Technical Articles

Loader

Product Features

1.High Reliability
Upgraded & enhanced front & back frames
Optimized H-series bucket
Enhanced front axle of the H-Series
Enhanced brake caliper
Fully optimized layout of pipes
Waterproof connectors
Improved painting process
2.High Efficiency and Energy Conservation
Patented dual-pump confluence and diffluence technology
Standard models provide the highest dumping height
Small turning radius
Biggest traction under combinatory operating conditions
Green, turbocharged, intercooled engine
New energies like LNG/CNG Patented proportional differential3.Safety
Complete safety signs
Neutral start protection for safer operation
Optional ROPS/FOPS cab
Flame retardant materials and EU-certified glass are used in the cab, offering higher safety
Newly added rear wiper
4.Comfortable Operation
Low-noise design for the machine
Ergonomics design of cab
Large field view in the H-series cab
Electronic oil level indicator comes as standard
Optional models with adjustable directions
5.Convenient Maintenance
Centralized lubricating grease inlet for easier adding butter
Central electrical control box for easier servicing
Wide-opening hood for easier servicing & maintenance of engine
Convertible fuel tank
Particular toolbox design
Optimized servicing marks6.Multifunctional
Standard bucket
Rock bucket
Gravel bucket
Enlarged bucket
Enlarged bucket
Enlarged bucket
Enlarged bucket
Flat sand bucket
Fixed log grapple
Pipe grapple
Sliding log grapple
Grass grapple
Snow blade
High dump bucket
High dump bucket
Side dump bucket

Wheel Loader,Compact Wheel Loader,Case Wheel Loader,Mini Wheel Loader

Fujian Dika Machinery Co.,Ltd , https://www.fjdika.com