Deep Suction Self-Priming Water Pump
ZXZ has long been developing and providing bearings with lower noise, higher bearing capacity and longer maintenance-free cycle for the elevator host industry. The designed bearing service life is the same as that of the elevator driving system, which is mainly used in the key parts of the tractor, guide wheel and escalator driving wheel. ZXZ has the world's leading bearing pre-grinding technology and high-quality raw material supplier system which provide a reliable guarantee for the Elevator Bearing research and development and manufacturing .
Elevator Bearing Elevator Bearing,Elevator Lifting Bearing,Escalator Parts Elevator Bearing,Zxz Bearings Elevator Bearing ZHEJIANG XCC GROUP CO.,LTD. , https://www.xccbearing.comDomestic Self-Priming Jet Water Pump (JET100A)
The JETL series are injection type clean water pumps, which are composed of a centrifugal pump and a nozzle, have the advantages of beautiful design, self-priming in short time, reliable performance, high head and deep suction. They are suitable for pumping clean water and non-aggressive liquid. They are particularly suitable for domestic applications such as supply water from well, pool etc, the automatic distribution of water by surge tanks and pressure switch, gardening, and pressure boosting etc.
Pumps should be installed in a covered area, protected against the weather.
Operating limitations
Max ambient temperature up to 40ºC
Max fluid temperature up to 40ºC
Max pressure up to 10 barÂ
Construction features
Pump Body: cast iron
Motor Housing: aluminum
Shaft: 45# steel /stainless steel
Impeller: Brass/Stainless Steel/PPO optionalÂ
Motor: closed, externally ventilated
Insulation Class: B/F
Protection Class: IP44 /IP54
Duty: continuously rated
Mechanical Seal: ceramic steatite/metalized carbon 
 
         Â
Domestic Self-Priming Jet Water Pump (JET100A)
The JETL series are injection type clean water pumps, which are composed of a centrifugal pump and a nozzle, have the advantages of beautiful design, self-priming in short time, reliable performance, high head and deep suction. They are suitable for pumping clean water and non-aggressive liquid. They are particularly suitable for domestic applications such as supply water from well, pool etc, the automatic distribution of water by surge tanks and pressure switch, gardening, and pressure boosting etc.
Pumps should be installed in a covered area, protected against the weather.
Operating limitations
Max ambient temperature up to 40ºC
Max fluid temperature up to 40ºC
Max pressure up to 10 barÂ
Construction features
Pump Body: cast iron
Motor Housing: aluminum
Shaft: 45# steel /stainless steel
Impeller: Brass/Stainless Steel/PPO optionalÂ
Motor: closed, externally ventilated
Insulation Class: B/F
Protection Class: IP44 /IP54
Duty: continuously rated
Mechanical Seal: ceramic steatite/metalized carbonÂ
          Â