Cutter Suction Dredging Equipment with Big Power

March 19, 2024

Model NO.: WSD350
Pump: Warm Technology
Water Flow: 3600m3/H
Dredging Depth: 10m
Discharge Distance: 200m
Trademark: Kaixiang
Transport Package: Container
Specification: 26*12*7
Origin: Qingzhou City, Shandong Province, China
HS Code: 89051000

Cutter Suction Dredging Equipment with Big Power

Introduction:
This is a hydraulic cutter suction dredger, the hull of which uses assembled box-shaped structure, it is equipped with a cross sliding device, and sand suction pipe rack lift device, etc. It uses the main diesel engine in the cabin to drag the sand pump. 
The crab winch, Bridge hoisting winch, the tail positioning cylinder and water pump is drived by the auxiliary diesel engine.
 Operating environment conditions 
- Maximum ambient air temperature: 40ºC 
- Minimum ambient air temperature: -10ºC 
- Maximum cabin temperature: 50ºC 
- Maximum river (sea) water temperature: 30ºC 
- Relative humidity: not more than 70% 
Applicable navigation areas: 
Suitable for dredging operations in class A or lower class inland river navigation areas 
Suitable soil: 
River sand and sea sand in class IV and lower class areas. 


The advantages of cutter suction dredging equipment:
    The cutter suction dredging equipment is wide-range in application, it can work in rivers and lakes, and be used for dredging, channel excavationl and reclamation.
    The cutter suction dredging equipment has good economy. The excavation and transportation of materials can be completed at one time, and it is not necessary to cooperate with other equipment, so the engineering cost is lower relatively.Cutter suction dredging equipment has large production, and the pump discharge distance is far.
    The cutter suction dredging equipment has the advantages of simple operation and easy control.With the wirerope of the two side ofcutter arm frame and the anchor fixed on the two side of the channel,and depending on towing by windlass hatchback, through the swing to cutter sediment material, and work in the control of swing angle, then the twist material through the mud pipe to convey to the specified location.

The main parameters:
 
NO. Item Size Remark
1 Total length 26m Underwater big arms is level condition
2 Total width 6.5m 
 
3 Moulded depth 1.8m  
 
4 Fulldraft 1.1m
 
5 Suction/discharge pipe dia. 450mm/400mm 
 
6 Discharge distance 200m
 
7 Dredging depth 10m
 
8 Water flow 3600m3/h
 

Cutter Suction Dredging Equipment with Big Power

Razor Cartridge Machine

Razor Cartridge Machine,Shaving Razor Machine,,Blade Making Machine ,Razor Blade Making Machine

NINGBO KAYDO PLASTIC CO.,LTD , https://www.kaydo-china.com