China's fuel ethanol industry has to consume
PVC high-efficiency composite lubricant H108 is a multi-functional lubricant produced from several high-end raw materials. It has both internal and external lubrication functions, balances the lubrication in the front, middle and late stages, improves the degree of plasticization, increases physical properties, and improves the surface gloss of the product, decrease separate out phenomenon, improve the cycle of cleaning the mold. It is suitable for the production and processing of all PVC rigid products except transparent products, especially for high-filled products, such as drainage pipes, wall panels, SPC floors, etc.
Method of use and addition amount: replace all lubricants in the formula - stearic acid, paraffin wax, Fischer-Tropsch wax, Polyethylene Wax, stearate, etc. only add this one product to reduce the probability of mismatching. the amount of addition is 20%-25% lower than the total amount of all internal and external lubricants added in the original formula .
High Class Synthetic Wax,Special Lubricant For Pvc Pipe,Pvc Transparent Product Lubricant,Pvc High-Efficiency Composite Lubricants Hengshui Yimei New Material Technology Co.,Ltd , https://www.oxidizedpewax.com
After comparison, the white paper concludes that China needs to consume 12 tons of water to produce one ton of ethanol, compared with 1.8 tons in the United States; China needs 3.3 tons of corn to produce 1 ton of ethanol, while the United States needs 2.8 ton; China's ethanol production Pollutant emissions are also much larger than in the United States. At the same time, due to the high cost of corn and other food materials, the current production cost of fuel ethanol in China is 17% higher than that in the United States, and the price of fuel ethanol products in China is 18% lower than that in the United States. According to industry sources, if the national policy subsidy is further reduced, the high consumption will become the “soft underbelly†of the development of fuel ethanol enterprises in China.
It is understood that the state will soon introduce the fuel ethanol industry policy and strictly limit the various production technical indicators. In the future, the consumption of one ton of fuel ethanol should be controlled below 5 tons, coal consumption should be reduced to less than 500 kilograms, and there should be higher requirements for chemical oxide emissions. This standard is a very high threshold for SMEs.
According to industry insiders, at present, China's fuel ethanol production must rely on government subsidies to ensure capital preservation or profitability. The relevant person of Jilin Fuel Ethanol Company stated that at present, the country subsidizes 1,370 yuan per ton for its fuel ethanol products. According to calculations, the current production cost of fuel ethanol in China is around 4,000 yuan/ton, and the market sales price is about 3,200 yuan/ton. If there is no subsidy, it will lose nearly 800 yuan per ton of fuel ethanol.
The reporter learned that gradually reducing subsidies until the final elimination of subsidies, while strictly controlling the consumption of energy and resources is the main idea for the country to develop fuel ethanol. Therefore, domestic key fuel ethanol producers are exploring the non-food line, striving to reduce consumption, reduce costs, speed up technological transformation, and increase production efficiency. According to reports, the current production targets of key enterprises such as Jilin Fuel Ethanol Company are moving closer to the international advanced level.