Model NO.: various
Density: 6.0~6.8g/cm3
Hardness: 90.8~94.0 Hra
Toughness: 7.1~10.3 MPa/M
Composition: Cermet
Shape: Round Bar, Rods, Strips, Inserts
Trademark: ubt
Transport Package: Cartons
Specification: various
Origin: China
HS Code: 8209101900
Model NO.: various
Density: 6.0~6.8g/cm3
Hardness: 90.8~94.0 Hra
Toughness: 7.1~10.3 MPa/M
Composition: Cermet
Shape: Round Bar, Rods, Strips, Inserts
Trademark: ubt
Transport Package: Cartons
Specification: various
Origin: China
HS Code: 8209101900
cermet is a kind of hard alloy material, which manufacured through powder metalluric process based on Tic, TiN or Ti(C,N) AS Hard phase, and Ni, Co and Mo as binder. The name Cermet Cmbines the words ceramic and metal, in comparision to tungsten cemented carbide, cermet has improved wear resistance, chemical stability, thermal stability and lower density. But on the other hand, it also has lower compressive strength and toughness. Therefor, the cermet is very suitable for making metal cutting tools, especialloy for finishing and semi-finishing tools, as well as various wear-resistance, corrosion-resistance and heat -resistance parts such as ball valve, flange, small bearing metal, bearing sleeve, nozles, and seal-ring ect.
As cutting tools, the advantage of cermet is its' inferior affinity with the work piece and extreme low wear coefficient, so cermet grades are preferably used in high speed finishing and semi-finishing or carbon steel, alloy steel, stainless steel and cast iron, where crater wear and buitl-up edge are problems. It enables a long tool life, close tolerances and beautiful cutting surfaces.
we can develop and produce various rods, tubes, plates, and wear parts of cemet to meet different application requirements, please withough hesitable to contact us if you have any needs for cermet rods, strips, wear parts.
Â
| GRADE |
ISO GRADE |
HRA |
Density
(g/cm3) |
TRS
(MPa) |
Toughness
(MPa/m) |
| BTC10 |
P01-P05 |
93.3 |
6.4 |
1980 |
7.7 |
| BTC10A |
P01-P05 |
92.8 |
6.8 |
2065 |
8.1 |
| BTT15 |
P10-P15 |
91.7 |
6.5 |
2210 |
8.8 |
| BT20A |
P20-P30 |
90.8 |
6 |
2460 |
10.1 |
If any demand for cermet products such as cermet rods, cermet strips, cermet inserts, cermet tool parts, contact me soon and you will get a surprise!
cermet is a kind of hard alloy material, which manufacured through powder metalluric process based on Tic, TiN or Ti(C,N) AS Hard phase, and Ni, Co and Mo as binder. The name Cermet Cmbines the words ceramic and metal, in comparision to tungsten cemented carbide, cermet has improved wear resistance, chemical stability, thermal stability and lower density. But on the other hand, it also has lower compressive strength and toughness. Therefor, the cermet is very suitable for making metal cutting tools, especialloy for finishing and semi-finishing tools, as well as various wear-resistance, corrosion-resistance and heat -resistance parts such as ball valve, flange, small bearing metal, bearing sleeve, nozles, and seal-ring ect.
As cutting tools, the advantage of cermet is its' inferior affinity with the work piece and extreme low wear coefficient, so cermet grades are preferably used in high speed finishing and semi-finishing or carbon steel, alloy steel, stainless steel and cast iron, where crater wear and buitl-up edge are problems. It enables a long tool life, close tolerances and beautiful cutting surfaces.
we can develop and produce various rods, tubes, plates, and wear parts of cemet to meet different application requirements, please withough hesitable to contact us if you have any needs for cermet rods, strips, wear parts.
Â
| GRADE |
ISO GRADE |
HRA |
Density
(g/cm3) |
TRS
(MPa) |
Toughness
(MPa/m) |
| BTC10 |
P01-P05 |
93.3 |
6.4 |
1980 |
7.7 |
| BTC10A |
P01-P05 |
92.8 |
6.8 |
2065 |
8.1 |
| BTT15 |
P10-P15 |
91.7 |
6.5 |
2210 |
8.8 |
| BT20A |
P20-P30 |
90.8 |
6 |
2460 |
10.1 |
If any demand for cermet products such as cermet rods, cermet strips, cermet inserts, cermet tool parts, contact me soon and you will get a surprise!