Model NO.: WXC160S
Trademark: VANGTON
Specification: 5000mm*4500*2400
Origin: China
HS Code: 8458990000
Model NO.: WXC160S
Trademark: VANGTON
Specification: 5000mm*4500*2400
Origin: China
HS Code: 8458990000
Centerless lathe, which is commonly known as stripping machine and peeling machine, is a kind of high efficient rotary cutting device. It is mainly used for the processing of round steel, copper, titanium and other metal materials of cylindrical rod. The middle of the centerless lathe is emptyand there is a knife around the plate. We will process materials here, fix, and then adjust the tilt angle of cutter, the cutter begins to spin at high speed.Â
| Model |
Input Dia. |
Length |
Feeding Speed |
Cutting Depth |
Surface Roughness |
Dia. Tolerance |
Spindle Motor |
Total Power |
| mm |
mm |
m/min |
mm |
- |
- |
kw |
kw |
| WXC20 |
Ñ„5-Ñ„22 |
≥1400 |
1-25 |
0.5-2 |
Ra≤3.2 |
IT9 |
22 |
30 |
| WXC40 |
Ñ„5.5-Ñ„40 |
≥1400 |
1-15 |
0.5-2 |
Ra≤3.2 |
IT9 |
45 |
63 |
| WXC60 |
Ñ„14-Ñ„80 |
≥2000 |
1-15 |
0.5-2 |
Ra≤3.2 |
IT9 |
45 |
63 |
| WXC80 |
Ñ„16-Ñ„85 |
≥2200 |
1-12 |
0.5-3 |
Ra≤3.2 |
IT9 |
55/75 |
75/90 |
| WXC100 |
Ñ„25-Ñ„110 |
≥2800 |
0.5-10 |
1-4 |
Ra≤3.2 |
IT9 |
75 |
95 |
| WXC130 |
Ñ„30-Ñ„135 |
≥3000 |
0.3-6 |
1-5 |
Ra≤3.2 |
IT9 |
90 |
120 |
| WXC160 |
Ñ„45-Ñ„170 |
≥3500 |
0.3-5 |
1-5 |
Ra≤3.2 |
IT9 |
110 |
140 |
| WXC200 |
Ñ„70-Ñ„210 |
≥4000 |
0.3-4 |
1-5 |
Ra≤3.2 |
IT9 |
132 |
165 |
| WXC250 |
Ñ„95-Ñ„260 |
≥4000 |
0.2-2.5 |
1-5 |
Ra≤3.2 |
IT9 |
160 |
210 |
| WXC350 |
Ñ„150-Ñ„360 |
≥4500 |
0.1-2 |
1-10 |
Ra≤3.2 |
IT9 |
200 |
265 |
| WXC400 |
Ñ„205-Ñ„410 |
≥4800 |
0.1-2 |
1-10 |
Ra≤3.2 |
IT9 |
250 |
345 |
| WXC500 |
Ñ„315-Ñ„510 |
≥5000 |
0.1-1.5 |
1-10 |
Ra≤3.2 |
IT9 |
315 |
415 |
Features of Centerless LatheFollowing advantage compared with ordinary lathe:
1. When processing over-length bar, Centerless Lathe has incomparable advantages. Ordinary lathe is good at processing short bar. But there is great restriction for processing long shaft. In theory, Centerless Lathe can process the bar of infinite length.
2. Centerless Lathe is not only processing bar, also wire rod. Including from wire rod to wire rod and from wire rod to bar.That the ordinary lathe can't do it.
3. Processing speed 1~12m/min, the working efficiency of Centerless Lathe is dozens of times of the ordinary lathe.
4.High precision, after peeling, tolerance of diameter reach≤IT9, surface roughness Ra≤6.3μm. But after straightening, Ra≤0.8μm.Specification
| Specification |
 |
WXC160S |
| Before Peeling Required |
Diameter Range(mm) |
Ñ„45-Ñ„170 |
| Length(mm) |
≥3500 |
| Yield Strength σb(Mpa) |
≤1100 |
| Surface Hardness |
≤HB320 |
| Original Curvature(mm/m) |
≤1.5 |
| Diameter Tolerance |
according to GB702-2004 second group |
| Roundness(mm) |
≤50% of diameter tolerance |
| Surface Roughness(Ra) |
≤25-50µm |
| After Peeling |
Diameter Range(mm) |
Ñ„40-Ñ„165 |
| Diameter Cutting Depth(mm) |
1.0-5.0 |
| Diameter Tolerance |
≤IT9 |
| Surface Roughness(Ra) |
≤3.2µm |
| Roundness(mm) |
≤0.03 |
| Feeding Speed(m/min) |
0.3-5.0 |
| Cutter Head Rotational Speed(rpm) |
60-400 |
| Main Machine Motor Power(kw) |
110(4poles) |
| Feeding Motor Power(kw) |
11(4poles) |
| Motor of Discharge Lathe(kw) |
7.5(servo) |
| Main Machine Outline Dimensions(m) |
5.0x4.5x2.4 |
| Main Machine Weight(t) |
15 |
| Total Capacity(kw) |
140 |
Main machine consists of the bed,main bearings,air/oil lubrication system,front-clamping pinch feeding and rear-clamping extracting,front guide and middle-rear guide system,main driving system etc.2. Air/oil lubrication systemÂ
Air/oil lubrication system is specially designed to solve the lubrication of mainshaft bearings with high speed rotation.It's composed of pump,oil and air distribution block and air processing compnents.3. High pressure water pump
High pressure water pump takes the cutting liquid cooled from reservoir through pipeline transporting the near to the nozzle of cutter head,until spraying on the tools and scraps. Then take away most the cutting heat and enter into chip cnveyor mouth of at the bottom of cutter head,through the pipeline reflow reservoir for cooling.4. Chip conveyor
The scraps through chip conveyor mouth to be taken to the chain plate and driving belt move with the scraps.Finally , the scraps are centralized collection.5. Hydraulic system
Hydraulic system consists of pump set of motor, all kinds of control valves, hydraulic oil tank, hydraulic pipline etc.Through controlling the cylinders of front-clamping pinch feeding and rear-clamping extracting to realize clamping and loosening for the bar.6. Electrical system
Electrical system includes power supply system and control system,by 1 power dstribution cabinet and 1 button station intergrated operation,implement pinch before and after the main transmission system, feeding system,cooling system,hydraulic system,the electrical control of chip conveyor and auxiliary machine. 
Â
 OUR SERVIC
Pre-sale service
1. Our professional and experienced engineer team helps every client to find his most suitable equipment or chose of plant.Â
2. Any kind of legal logo printing or design are available.Â
3. Good Quality +Â Factory Price +Â Quick Response +Â Reliable Service, is what we are trying best to offer you.Â
After you choose:Â
1. We will make drawing and show you how the pant looks.Â
2. Every equipment will be checked carefully before packing. Video on machine testing is available.Â
3. Email you the tracking no., and help to chase the container until it arrives you.Â
After-sale service
1. We are very glad that customers give us some suggestion for price and products.Â
2. If you have any question, please contact us freely by E-mail or Telephone.Â
FAQ
Q. What is your payment term?Â
A: T/T 30% down payment, balance to be paid before shipment.Â
Q: What is your main market?Â
A: South America, Eastern Europe, Southeast Asia, Africa, Oceania, Eastern Asia
Q: What is your producing time?Â
A: Producing time depends on that machines you ordered. Usually takes 45 days.Â
Q: What documents you can offer?Â
A: We can offer invoice, packing list, contract, instructions, customs declaration, certificate of origin, CE. If client need other documents, specifications, please confirm with service staff.Â
Q: If equipments have some quality problem, how would you deal with?Â
A: We will responsible for all the quality problems. We will check the machine to get the problem. If need parts, will send them to you.Â
Q: How to install the equipments?Â
A: We send 1-2 engineer (100USD/person/day) to the local plant for helping install and commissioning equipments. To save time, our service stuff will tell you what to prepare in advance. We can also teach the workers to how to use the machines and how to make the products better.Â
 www.vangton.com
Â
Â
Centerless lathe, which is commonly known as stripping machine and peeling machine, is a kind of high efficient rotary cutting device. It is mainly used for the processing of round steel, copper, titanium and other metal materials of cylindrical rod. The middle of the centerless lathe is emptyand there is a knife around the plate. We will process materials here, fix, and then adjust the tilt angle of cutter, the cutter begins to spin at high speed.Â
| Model |
Input Dia. |
Length |
Feeding Speed |
Cutting Depth |
Surface Roughness |
Dia. Tolerance |
Spindle Motor |
Total Power |
| mm |
mm |
m/min |
mm |
- |
- |
kw |
kw |
| WXC20 |
Ñ„5-Ñ„22 |
≥1400 |
1-25 |
0.5-2 |
Ra≤3.2 |
IT9 |
22 |
30 |
| WXC40 |
Ñ„5.5-Ñ„40 |
≥1400 |
1-15 |
0.5-2 |
Ra≤3.2 |
IT9 |
45 |
63 |
| WXC60 |
Ñ„14-Ñ„80 |
≥2000 |
1-15 |
0.5-2 |
Ra≤3.2 |
IT9 |
45 |
63 |
| WXC80 |
Ñ„16-Ñ„85 |
≥2200 |
1-12 |
0.5-3 |
Ra≤3.2 |
IT9 |
55/75 |
75/90 |
| WXC100 |
Ñ„25-Ñ„110 |
≥2800 |
0.5-10 |
1-4 |
Ra≤3.2 |
IT9 |
75 |
95 |
| WXC130 |
Ñ„30-Ñ„135 |
≥3000 |
0.3-6 |
1-5 |
Ra≤3.2 |
IT9 |
90 |
120 |
| WXC160 |
Ñ„45-Ñ„170 |
≥3500 |
0.3-5 |
1-5 |
Ra≤3.2 |
IT9 |
110 |
140 |
| WXC200 |
Ñ„70-Ñ„210 |
≥4000 |
0.3-4 |
1-5 |
Ra≤3.2 |
IT9 |
132 |
165 |
| WXC250 |
Ñ„95-Ñ„260 |
≥4000 |
0.2-2.5 |
1-5 |
Ra≤3.2 |
IT9 |
160 |
210 |
| WXC350 |
Ñ„150-Ñ„360 |
≥4500 |
0.1-2 |
1-10 |
Ra≤3.2 |
IT9 |
200 |
265 |
| WXC400 |
Ñ„205-Ñ„410 |
≥4800 |
0.1-2 |
1-10 |
Ra≤3.2 |
IT9 |
250 |
345 |
| WXC500 |
Ñ„315-Ñ„510 |
≥5000 |
0.1-1.5 |
1-10 |
Ra≤3.2 |
IT9 |
315 |
415 |
1. When processing over-length bar, Centerless Lathe has incomparable advantages. Ordinary lathe is good at processing short bar. But there is great restriction for processing long shaft. In theory, Centerless Lathe can process the bar of infinite length.
2. Centerless Lathe is not only processing bar, also wire rod. Including from wire rod to wire rod and from wire rod to bar.That the ordinary lathe can't do it.
3. Processing speed 1~12m/min, the working efficiency of Centerless Lathe is dozens of times of the ordinary lathe.
4.High precision, after peeling, tolerance of diameter reach≤IT9, surface roughness Ra≤6.3μm. But after straightening, Ra≤0.8μm.Specification
| Specification |
 |
WXC160S |
| Before Peeling Required |
Diameter Range(mm) |
Ñ„45-Ñ„170 |
| Length(mm) |
≥3500 |
| Yield Strength σb(Mpa) |
≤1100 |
| Surface Hardness |
≤HB320 |
| Original Curvature(mm/m) |
≤1.5 |
| Diameter Tolerance |
according to GB702-2004 second group |
| Roundness(mm) |
≤50% of diameter tolerance |
| Surface Roughness(Ra) |
≤25-50µm |
| After Peeling |
Diameter Range(mm) |
Ñ„40-Ñ„165 |
| Diameter Cutting Depth(mm) |
1.0-5.0 |
| Diameter Tolerance |
≤IT9 |
| Surface Roughness(Ra) |
≤3.2µm |
| Roundness(mm) |
≤0.03 |
| Feeding Speed(m/min) |
0.3-5.0 |
| Cutter Head Rotational Speed(rpm) |
60-400 |
| Main Machine Motor Power(kw) |
110(4poles) |
| Feeding Motor Power(kw) |
11(4poles) |
| Motor of Discharge Lathe(kw) |
7.5(servo) |
| Main Machine Outline Dimensions(m) |
5.0x4.5x2.4 |
| Main Machine Weight(t) |
15 |
| Total Capacity(kw) |
140 |
Main machine consists of the bed,main bearings,air/oil lubrication system,front-clamping pinch feeding and rear-clamping extracting,front guide and middle-rear guide system,main driving system etc.2. Air/oil lubrication systemÂ
Air/oil lubrication system is specially designed to solve the lubrication of mainshaft bearings with high speed rotation.It's composed of pump,oil and air distribution block and air processing compnents.3. High pressure water pump
High pressure water pump takes the cutting liquid cooled from reservoir through pipeline transporting the near to the nozzle of cutter head,until spraying on the tools and scraps. Then take away most the cutting heat and enter into chip cnveyor mouth of at the bottom of cutter head,through the pipeline reflow reservoir for cooling.4. Chip conveyor
The scraps through chip conveyor mouth to be taken to the chain plate and driving belt move with the scraps.Finally , the scraps are centralized collection.5. Hydraulic system
Hydraulic system consists of pump set of motor, all kinds of control valves, hydraulic oil tank, hydraulic pipline etc.Through controlling the cylinders of front-clamping pinch feeding and rear-clamping extracting to realize clamping and loosening for the bar.6. Electrical system
Electrical system includes power supply system and control system,by 1 power dstribution cabinet and 1 button station intergrated operation,implement pinch before and after the main transmission system, feeding system,cooling system,hydraulic system,the electrical control of chip conveyor and auxiliary machine. Â
 OUR SERVIC
Pre-sale service
1. Our professional and experienced engineer team helps every client to find his most suitable equipment or chose of plant.Â
2. Any kind of legal logo printing or design are available.Â
3. Good Quality +Â Factory Price +Â Quick Response +Â Reliable Service, is what we are trying best to offer you.Â
After you choose:Â
1. We will make drawing and show you how the pant looks.Â
2. Every equipment will be checked carefully before packing. Video on machine testing is available.Â
3. Email you the tracking no., and help to chase the container until it arrives you.Â
After-sale service
1. We are very glad that customers give us some suggestion for price and products.Â
2. If you have any question, please contact us freely by E-mail or Telephone.Â
FAQ
Q. What is your payment term?Â
A: T/T 30% down payment, balance to be paid before shipment.Â
Q: What is your main market?Â
A: South America, Eastern Europe, Southeast Asia, Africa, Oceania, Eastern Asia
Q: What is your producing time?Â
A: Producing time depends on that machines you ordered. Usually takes 45 days.Â
Q: What documents you can offer?Â
A: We can offer invoice, packing list, contract, instructions, customs declaration, certificate of origin, CE. If client need other documents, specifications, please confirm with service staff.Â
Q: If equipments have some quality problem, how would you deal with?Â
A: We will responsible for all the quality problems. We will check the machine to get the problem. If need parts, will send them to you.Â
Q: How to install the equipments?Â
A: We send 1-2 engineer (100USD/person/day) to the local plant for helping install and commissioning equipments. To save time, our service stuff will tell you what to prepare in advance. We can also teach the workers to how to use the machines and how to make the products better.Â
 www.vangton.com
Â
Â
Pedal Bin
Pedal Bin
1. Hands-free opening with a foot pedal to prevent the spread of germs.
2 The stainless steel body of the bin is fingerprint-proof, smudge-resistant, and easy to clean.
3.Perfect way to store trash in your kitchen, office, wherever space is limited .
4. Inner compartments are removable and holds much crash.
FAQ:
1:How can
I get the sample?
We can
provide the sample for customers to check the quality.
Please
kindly provide the delivery info for calculate the sample cost. If you have DHL
/TNT/UPS/FEDEX account, please also kindly provide it to us.
You can
do the payment of sample via T/T and PayPal.
2:How
about the sample time?
Usually
the sample time is 7~10 days after have the sample cost.
3:How
long will it take for mass production?
Usually
45~60 days after have the deposit.
4:Can we
have our logo or company name to be printed on your products or the package?
Welcome
OEM.
5:what
certificate can you provide?
CE,CB,GS,FDA,LFGB,ROHS
are available here.
6:How can
we get your monthly new products announcement?
Please join our mailing lists.
Compost Bin,Oval Shape Pedal Bin,Stainless Steel Dust Bin,Stainless Steel Pedal Bin
Jiangmen Wellway Houseware Co.,Ltd , https://www.jmwellway.com