Automatic Asphalt Distributor, Asphalt Distributor, HOWO Automatic

September 09, 2022

  • Model NO.: SAAD1
  • Object: Asphalt Concrete Pavement
  • Mixing Method: Continuous Drum
  • Product Capacity: 40～400t/h
  • Condition: New
  • Controller: Intellgent
  • Spray Precision: ≤2%
  • Transport Package: Sea Worthy Packing
  • Origin: Jiangsu, China
  • Type: Asphalt Distributor
  • Moving Type: Mobile
  • Automatic Grade: Automatic
  • Certification: ISO9001: 2000, CE
  • After-Sales Service Provided: Engineers Available
  • Nozzle: 39(One Control Three)
  • Trademark: Super-above
  • Specification: CE
  • HS Code: 8474390000
 Automatic Asphalt Distributor,asphalt distributor,howo automatic
Automatic Asphalt Distributor
Brief introduce:
Our automatic asphalt distributor adopts the advanced foreign and domestic technologies. In addition, we join with Chang'an University, Zhejiang University and other renowned universities in researching and developing new automatic asphalt distributor.
Application
Automatic asphalt distributor is a kind of road machinery. It is applicable for layer-penetration oil, waterproof layer and bond coat at the bottom layer of high-level asphalt road.
Configuration
LMT series of automatic asphalt distributor is made up of Chassis ,asphalt tank, asphalt pump , spray system, heat conduction oil heating system, hydraulic system, electric control system, automatic control system and rising series. The main fitting adopts the most advanced components with computer system controlled spraying. Our automatic asphalt distributor's accuracy meets Euro standards.
Together with the advantages of asphalt distributors in the word, with automatic asphalt distributor, we innovated for new technologies.
Any asphalt used is displaced
Asphalt nozzle is multilayer filtrate and keeps the quality of spray
Asphalt spraying is controlled by computer system
Asphalt spray is suitable for asphalt pavement construction, which can improve performance achievements to international standards with zero tolerance.Automatic Asphalt Distributor, Asphalt Distributor, HOWO Automatic
Automatic Asphalt Distributor, Asphalt Distributor, HOWO Automatic

Parameters of Automatic Asphalt Distributor
Model LMT5251GLQ LMT5161GLQ LMT5162GLQ LMT5120GLQ LMT5111GLQ
Chassis ZZ125734647C BJ5163ELFFD DFL1160BX BJ1123VJPFG-S EQ1110TJ12D5
Truck type Cab-over-engine6*4 Cab-over-engine6*4 Cab-over-engine6*4 Cab-over-engine6*4 Cab-over-engine6*4
Asphalt tank capacity(L) 12000 8000 8000 6600 6000
Spray bar variable(M0 0-6 0-6 0-6 0-6 0-6
Spray bar value(KG) 0.3-3.0 0.3-3.0 0.3-3.0 0.3-3.0 0.3-3.0
Spray precision ≤2% ≤2% ≤2% ≤2% ≤2%
Dimension(L*W*H) 10500×2496×3350 8785×2455×3015 8995×2490×3200 5990×2350×2855 7995×2270×2870
Weight(KG) 25000 15800 16000 12005 11495
 
Strengths of Automatic Asphalt Distributor
Automatic asphalt distributor boasts three layers.It can adjust the spray amount according to its operational speed.
The whole asphalt spraying process can be finished in the cab.
Each nozzle is controlled by separate computer. The spray width can be adjusted at random.
The control procedure is quipped with two control systems, cab and post operational platform to ensure the reliability of asphalt spray.
The computer control system adopts modular design for lower accident rate and maintenance
The temperature of asphalt in tank is kept below or equal to two degrees per hour.
The distributor is equipped with automatic blowing device to shift the asphalt outside to the tank.
The machine is also equipped with spray gun device to add asphalt at the opposite corner.
Asphalt pump, nozzle and asphalt tank can be heated with heat transfer oil completely or separately
The safe and reliable heat transfer oil heating system is controlled automatically.
Two kinds of speed testing devices are available: infrared impulsive sensor and America Dickey-John radar velocity.

Bitumen Pressure Distributor
Bitumen Pressure Distributor has been developed especially to aid operator's total requirements for portability and effective functionality. The product is truck mounted and equipped with a sophisticated heating system and a variable spray bar to ensure it can operate as a constant pressure system, comprising of an air compressor, auxiliary engine and a bitumen pump, giving a constant rate application of hot bitumen or cold tar. The product is also equipped with a special pressure cleaning system which facilitates cleaning the system after use and prevents clogging.
 
Truck mounted self propelled Bitumen Pressure Distributor with suitable heating system and variable spray bar to operate on constant pressure system, complete with air-compressor, bitumen pump, auxiliary engine, tank mounting and other accessories for uniform and constant rate applications of hot bitumen (or cold tar) as per the specifications indicated below.
Bitumen Tank
Capacity 4000 / 5000 / 6000 / 8000 litres
Thickness of shell 4 mm.
Shape Rectangular / Oval shape with light resin bonded rock wool insulation 50 mm. thick.
Manhole 600 mm. dia.
Filter Removable screen filter.
Filling of Tank (i) Through manhole. (ii) Through self-priming by own pump.
Temperature Dial type thermometer of range 0° to 250° (minimum).
Tank Contents Measurement With calibrated dipstick
Power Pack
Engine 4 - Stroke twin cylinder air / water cooled diesel engine of 25 hp at 2000 RPM.
Bitumen Pump Shuttle Block Type 380 to 450 litres per minute.
Compressor Double cylinder 3 HP. Pressure 9 Kg./sq. cm. maximum. Capacity 360 litres.
Heating
Type of Burner Single high pressure oil burner for adequate heating of viscous binder, oil consumption 20 lt/hr.
Tank Capacity 50 litres.
Fire Tube 230 mm. dia.
Spray Bar
Type Folding type fitted with pressure gauge, regulating valve etc.
Width Variable width from 2.4 to 4.2 metres by extension bar.
Width Adjustment By closing of nozzles.
Adjustment of height Mechanical.
Pre-heating of spray bar By full circulation of preheated bitumen.
Distance of nozzles 225 mm.
Spraying pressure To be adjusted between 0-6 bars.
Hand lances 2 Nos
Cleaning By air pressure or diesel oil.
Rate of application 0.3 to 1.0 Kg. / sq.m. Calibration chart will be provided inside the driver's cabin and at the operator's platform
Operation
The operation of the spray bar is from operator's platform at the rear.
Truck
TATA 1613 SE Truck Chassis of WB-4225 mm. and 4x2 configuration or equivalent. The driver's cabin will be built as per R.T.O. requirement. The battery used for starting the diesel engine conforms to ISI.
ISI Specifications
All the bought-out components conform to relevant ISI specifications and are of reputed make.
Optional
Trolley mounted in place of Truck mounted.
 

Stainless Steel Plain Weave Mesh

Stainless Steel Plain Weave Mesh is one of the most popular stainless steel mesh. Its main feature in weave type is the same density of warp and weft wire diameters.

Material: 201,304 (L), 310, 316 (L), 410, 430, etc.

Weave characteristics: Stainless steel plain weave mesh is one of the most common way of weaving, the warp and weft are overlapping, and the warp and weft yarn with the same diameter, the wire along the long, the net width of weft are parallel to the net, the warp and weft wire cross, one at the top at the bottom, at an Angle of 90 °.

Properties: acid resistance, alkali resistance, high temperature resistance, tension and abrasion resistance, good filtration precision and high load strength.

USE: Stainless steel mesh is widely used in aerospace, petroleum, chemical industry, scientific research and transportation, etc, used in acid, alkali environment conditions screening and filter, oil industry as mud mesh, chemical fiber industry as screen mesh, plating industry as pickling nets

Specification: The standard roll width: 1m-2m. Standard roll length: 30-50m.

The steel mesh in special width and length can be produced according to customers` requirements.

wire mesh stainless industrial wire mesh


The warp wire (D1) : all longitudinal braided lines.

The weft wire (D2) : all horizontal weaving lines.

Aperture (L1 and L2) : the distance between two meridians or two weft.

Mesh number:number of mesh holes per inch.

Thickness (T) : thickness of the net.

Specification list:

SPEC

WIRE DIAMETER

APERTURE

OPENING

RATE

WEIGHT(POUND)

INCH

MM

INCH

MM

1x1

.080

2.03

.920

23.37

84.6

41.1

2X2

.063

1.60

.437

11.10

76.4

51.2

3X3

.054

1.37

.279

7.09

70.1

56.7

4X4

.063

1.60

.187

4.75

56.0

104.8

4X4

.047

1.19

.203

5.16

65.9

57.6

5X5

.041

1.04

.159

4.04

63.2

54.9

6X6

.035

.89

.132

3.35

62.7

48.1

8X8

.028

.71

.097

2.46

60.2

41.1

10X10

.025

.64

.075

1.91

56.3

41.2

10X10

.020

.51

.080

2.03

64.0

26.1

12X12

.023

.584

.060

1.52

51.8

42.2

12X12

.020

.508

.063

1.60

57.2

31.6

14X14

.023

.584

.048

1.22

45.2

49.8

14X14

.020

.508

.051

1.30

51.0

37.2

16X16

.018

.457

.0445

1.13

50.7

34.5

18X18

.017

.432

.0386

.98

48.3

34.8

20X20

.020

.508

.0300

.76

36.0

55.2

20X20

.016

.406

.0340

.86

46.2

34.4

24X24

.014

.356

.0277

.70

44.2

31.8

30X30

.013

.330

.0203

.52

37.1

34.8

30X30

.012

.305

.0213

.54

40.8

29.4

30X30

.009

.229

.0243

.62

53.1

16.1

35X35

.011

.279

.0176

.45

37.9

29.0

40X40

.010

.254

.0150

.38

36.0

27.6

50X50

.009

.229

.0110

.28

30.3

28.4

50X50

.008

.203

.0120

.31

36.0

22.1

60X60

.0075

.191

.0092

.23

30.5

23.7

60X60

.007

.178

.0097

.25

33.9

20.4

70X70

.0065

.165

.0078

.20

29.8

20.8

80X80

.0065

.165

.0060

.15

23.0

23.2

80X80

.0055

.140

.0070

.18

31.4

16.9

90X90

.005

.127

.0061

.16

30.1

15.8

100X100

.0045

.114

.0055

.14

30.3

14.2

100X100

.004

.102

.0060

.15

36.0

11.0

100X100

.0035

.089

.0065

.17

42.3

8.3

110X110

.0040

.1016

.0051

.1295

30.7

12.4

120X120

.0037

.0940

.0064

.1168

30.7

11.6

150X150

.0026

.0660

.0041

.1041

37.4

7.1

160X160

.0025

.0635

.0038

.0965

36.4

5.94

180X180

.0023

.0584

.0033

.0838

34.7

6.7

200X200

.0021

.0533

.0029

.0737

33.6

6.2

250X250

.0016

.0406

.0024

.0610

36.0

4.4

270X270

.0016

.0406

.0021

.0533

32.2

4.7

300X300

.0051

.0381

.0018

.0457

29.7

3.04

325X325

.0014

.0356

.0017

.0432

30.0

4.40

400X400

.0010

.0254

.0015

.370

36.0

3.3

500X500

.0010

.0254

.0010

.0254

25.0

3.8

635X635

.0008

.0203

.0008

.0203

25.0

2.63


Products Photoes:

Stainless Steel Wire Mesh

Stainless Steel Plain Weave Mesh,Stainless Steel Wire Mesh,Stainless Steel Mesh,Plain Weave Mesh

Anping Xinzheng Metal Wire Mesh Co., Ltd , https://www.sievingmesh.com