4 Roll Corrugated Sheet Metal Rolling Machines Making in Boiler
Hot chamber die casting is usually dominated by die casting of low-melting-point alloys, and the most important representative is zinc alloy Die Casting Products. And it mainly produces small die castings. If it is medium and large die castings, it is usually processed by Cold Chamber Die Casting. Hot chamber die casting is that when the molten metal filled into the mold cavity always flows in a closed channel, oxide inclusions are not easily involved, and the quality of the die casting is relatively guaranteed. Compared with cold chamber die casting, it has the characteristics of lower material loss and higher productivity.
SCZY has hot chamber die casting equipment as well as cold chamber die casting equipment. Hot chamber die casting is mainly used to produce zinc alloy products, and some small other alloy processing. Cold chamber die casting is used to process aluminum alloy die castings and other medium and large die castings. We separate and independently manage hot chamber die casting and cold chamber die casting, so that the utilization and service life of the equipment can be fully utilized, and product quality and production delivery can be better managed.
Hot Chamber Die Casting, Die Casting Machining, Zinc Die Casting Products, Die Casting Zinc, Pressure Casting, Die Casting Shenzhen SCZY Technology Co.,Ltd , https://www.szcasting.com
Corrugated pipe rolling machine for liner
The special forming equipment for corrugated cylinder (that is, corrugated plate bending machine) is a special equipment for deformating cylindrical cylinder into corrugated cylinder. It uses the ordinary process to roll the steel plate into the cylinder, and then the cylinder is formed into a corrugated cylinder on a special molding roll.Â
The equipment is superior in performance, compact in structure and easy to operate. The lower forming roller adopts the hydraulic mode to move up and down, the upper forming roller is fixed, and the lower forming roll position can be displayed by digital, thereby monitoring the amount of wave height, and improving the product efficiency and the product quality.
If the wave distance changes, different molding rollers can be replaced to form different specifications of the corrugated cylinder.
Â
NO.
   Parameter
   Data
1
   Model
  MC
2
   Diameter range
  400-6000mm
3
   Strip width
   500-4000mm
4
   Strip thickness
   1.0-10.0mm
5
   Feeding speed
   1-20m/min
6
   Motor power
   According to specific type
Â
