Model NO.: SFBP1-G1100-01
Motor: Water Cooled Motors to Extended Life
Pump Body: Thermoplastic
Protection: Anti-Airlock, Ignition Protected
Outlet Dimension: 29mm/1-1/8′′
Duty Cycle: Intermittent
Housing: Tough ABC Housing
Type: Inland and Coastal Boats
Material: Thermoplastic
Trademark: SEAFLO
Transport Package: 1PC/Inner Box; 40PCS/CTN; Seaworthy Strong Cartons
Specification: CE
Origin: Fujian, China
HS Code: 8413709190
Model NO.: SFBP1-G1100-01
Motor: Water Cooled Motors to Extended Life
Pump Body: Thermoplastic
Protection: Anti-Airlock, Ignition Protected
Outlet Dimension: 29mm/1-1/8′′
Duty Cycle: Intermittent
Housing: Tough ABC Housing
Type: Inland and Coastal Boats
Material: Thermoplastic
Trademark: SEAFLO
Transport Package: 1PC/Inner Box; 40PCS/CTN; Seaworthy Strong Cartons
Specification: CE
Origin: Fujian, China
HS Code: 8413709190
12v Mini Submersible Water Pump, DC Solar Submersible Pump Price
1100 GPH
Product Description
1. Heavy duty motors with stainless steel shafts and tough thermoplastic bodies.
2. Totally submersible and ignition protected.
3. To all existing safety standards.
4. Water cooled motors for long life, with anti airlock design and moisture tight seals.
5. Snap-lock strainer base for easy installation and removal, and silent vibration free running
6. Includes comprehensive user manual with installation instructions and wiring diagram
Application
Typically used in boat hulls / bilges
Bait tanks
Ponds, pools, spas
Other applications where you have to remove water from
Note: These pumps are designed for intermittent use only, NOT designed for continuous use
How a Bilge Pump Works
Non-automatic bilge pumps offer traditional operation activated by a float or panel switch. Removal of the motor cartridge allows for easy cleaning of the strainer and impeller in the event that the pump becomes clogged with debris. Electric Submersible Pumps are by far the most popular type of electric Bilge Pumps, submersibles give very high outputs, are cost effective, have low amp draw and are easy to install. They are designed to fit in the lowest part of the bilge and only require discharge pipe work and electricity supply.
Backed SEAFLO's 1-Year Warranty!
| Model |
Flow rate |
Volts |
Current |
Head |
Wire lead |
Outlet Dia |
N.W/G.W |
| SFBP1-G350-01 |
350 GPH |
12V |
1.8 A |
3 m |
1 m |
19 mm/3/4" |
0.33/0.40 kg |
| SFBP1-G500-01 |
500 GPH |
12V |
2.2A |
3 m |
1 m |
19 mm/3/4" |
0.33/0.40 kg |
| SFBP2-G500-01 |
500 GPH |
24V |
1.2 A |
3 m |
1 m |
19 mm/3/4" |
0.33/0.40 kg |
| SFBP1-G750-01 |
750 GPH |
12V |
2.5 A |
3 m |
1 m |
19 mm/3/4" |
0.33/0.40 kg |
| SFBP2-G750-01 |
750 GPH |
24V |
1.5 A |
3 m |
1 m |
19 mm/3/4" |
0.33/0.40 kg |
| SFBP1-G1100-01 |
1100 GPH |
12V |
3.5 A |
4 m |
1 m |
29 mm/1-1/8" |
0.38/0.44 kg |
| SFBP2-G1100-01 |
1100 GPH |
24V |
1.5 A |
4 m |
1 m |
29 mm/1-1/8" |
0.38/0.44 kg |
100 pieces in general, but we also sale about 10--50 pieces for new costumers for their sample testing.
Â
2. What about the delivery time?It depends on your order quantity; it usually takes 15-25days upon receipt of your 30% deposit by T/T. Sample can be delivered within 7days.
Â
3. Can I buy different types in one container?Yes, you can mix different types in one container.
Â
4. Do you have oversea agents?1. Of course. We have many agents overseas, such as Dacon Europe A/S in Denmark, A P Lifting Gear Company LTD in United Kingdom, SEAFLO MARINE & RV NORTH AMERICA, LLC in United States, Bin Alshaikh Abobaker for Treading in Yemen, Williams Industrial Products Pty Ltd/Marine Systems Australia and SEAFLO AUS pty in Australia, Azzi Sport Marine S.A.R.L in Lebanon, SARAY DENIZ MALZEMELERI YATCILIK SAN.TIC.LTD.STI in Turkey, RECAMBIOS MARINOS S.L in Spain, DINO CO.,LTD in South Korea.
2. Welcome oversea agents!Â
5.Do you accept OEM/ODMYes. We are also the OEM supplier of many famous companies, such as WALMAT. Â
6. What is your terms of payment.T/T, 30% in advance, balance against B/L copy.Â
7. What is your warranty?5 years, and within 24 hours reply will be provided to solve customers' problems.
Â
8. What is your port of loading?Fuzhou Port. Â So the price what we quote you is FOB Xiamen.
12v Mini Submersible Water Pump, DC Solar Submersible Pump Price
1100 GPH
Product Description
1. Heavy duty motors with stainless steel shafts and tough thermoplastic bodies.
2. Totally submersible and ignition protected.
3. To all existing safety standards.
4. Water cooled motors for long life, with anti airlock design and moisture tight seals.
5. Snap-lock strainer base for easy installation and removal, and silent vibration free running
6. Includes comprehensive user manual with installation instructions and wiring diagram
Application
Typically used in boat hulls / bilges
Bait tanks
Ponds, pools, spas
Other applications where you have to remove water from
Note: These pumps are designed for intermittent use only, NOT designed for continuous use
How a Bilge Pump Works
Non-automatic bilge pumps offer traditional operation activated by a float or panel switch. Removal of the motor cartridge allows for easy cleaning of the strainer and impeller in the event that the pump becomes clogged with debris. Electric Submersible Pumps are by far the most popular type of electric Bilge Pumps, submersibles give very high outputs, are cost effective, have low amp draw and are easy to install. They are designed to fit in the lowest part of the bilge and only require discharge pipe work and electricity supply.
Backed SEAFLO's 1-Year Warranty!
| Model |
Flow rate |
Volts |
Current |
Head |
Wire lead |
Outlet Dia |
N.W/G.W |
| SFBP1-G350-01 |
350 GPH |
12V |
1.8 A |
3 m |
1 m |
19 mm/3/4" |
0.33/0.40 kg |
| SFBP1-G500-01 |
500 GPH |
12V |
2.2A |
3 m |
1 m |
19 mm/3/4" |
0.33/0.40 kg |
| SFBP2-G500-01 |
500 GPH |
24V |
1.2 A |
3 m |
1 m |
19 mm/3/4" |
0.33/0.40 kg |
| SFBP1-G750-01 |
750 GPH |
12V |
2.5 A |
3 m |
1 m |
19 mm/3/4" |
0.33/0.40 kg |
| SFBP2-G750-01 |
750 GPH |
24V |
1.5 A |
3 m |
1 m |
19 mm/3/4" |
0.33/0.40 kg |
| SFBP1-G1100-01 |
1100 GPH |
12V |
3.5 A |
4 m |
1 m |
29 mm/1-1/8" |
0.38/0.44 kg |
| SFBP2-G1100-01 |
1100 GPH |
24V |
1.5 A |
4 m |
1 m |
29 mm/1-1/8" |
0.38/0.44 kg |
100 pieces in general, but we also sale about 10--50 pieces for new costumers for their sample testing.
Â
2. What about the delivery time?It depends on your order quantity; it usually takes 15-25days upon receipt of your 30% deposit by T/T. Sample can be delivered within 7days.
Â
3. Can I buy different types in one container?Yes, you can mix different types in one container.
Â
4. Do you have oversea agents?1. Of course. We have many agents overseas, such as Dacon Europe A/S in Denmark, A P Lifting Gear Company LTD in United Kingdom, SEAFLO MARINE & RV NORTH AMERICA, LLC in United States, Bin Alshaikh Abobaker for Treading in Yemen, Williams Industrial Products Pty Ltd/Marine Systems Australia and SEAFLO AUS pty in Australia, Azzi Sport Marine S.A.R.L in Lebanon, SARAY DENIZ MALZEMELERI YATCILIK SAN.TIC.LTD.STI in Turkey, RECAMBIOS MARINOS S.L in Spain, DINO CO.,LTD in South Korea.
2. Welcome oversea agents!Â
5.Do you accept OEM/ODMYes. We are also the OEM supplier of many famous companies, such as WALMAT. Â
6. What is your terms of payment.T/T, 30% in advance, balance against B/L copy.Â
7. What is your warranty?5 years, and within 24 hours reply will be provided to solve customers' problems.
Â
8. What is your port of loading?Fuzhou Port. Â So the price what we quote you is FOB Xiamen.
Mobile Phone And Accessories Mold
By concentrating on molding and mold "niche markets", we play a very useful molding factory and mold maker role from the Far East, Taiwan, whenever customers want to develop their new projects. We provide services from A to Z to our customers on a very economic cost and effect basis.We manufacture.... custom plastic injection molding parts and molds, custom silicone rubber molding parts and molds, custom stamping die molding parts and molds, custom liquid silicone rubber molding and molds, custom Ls....(Mold Master, MasterFlow, LKM, Incoe systems...etc). We are particularly specialized in dealing with ....undercut molds, unscrewing molds, core pulling structure molds, high gloss polished molds, interchangeable core molds, hot compression molds, 2-component injection molds, and pilot molds for small series production, etc.
Mobile Phone And Accessories Mold,Mobile Phone And Accessories Molds,Mobile Phone And Accessories Mold Design,Mobile Phone And Accessories Mold Technology
Intertech Machinery Inc. , https://www.taiwanmouldmaker.com